Abstract:<span><b>Abstract</b>The flouride-salt-cooled high-temperature reactor (FHR) uses graphite-matrix coated-particle fuel [the same as high-temperature gas-cooled reactors (HTGRs)] and a clean liquid salt coolant. It delivers heat to the industrial process or the power cycle at temperatures between 600°C and 700°C with average heat delivery temperatures higher than for other reactors. The melting point of the liquid salt coolant is above 450°C. The high minimum temperatures present refueling challenges and require special features to control temperatures, avoiding excessively high temperatures and freezing of the coolant that could impact decay heat cooling systems. This paper describes a preconceptual FHR design that addresses many of these challenges by adopting features from the British advanced gas-cooled reactor (AGR) and alternative decay heat cooling systems. The bases for specific design choices are described.The AGRs are carbon dioxide–cooled and graphite-moderated reactors that use cylindrical fuel subassemblies with vertical refueling at 650°C, which meets the FHR high-temperature refueling requirements. Fourteen AGRs have operated for many decades. The AGR uses eight cylindrical fuel subassemblies, each 1 m tall coupled axially together by a metal stringer to create a long fuel assembly. The stringer assemblies are in vertical channels in a graphite core that provides neutron moderation. This geometric core design is compatible with an FHR using graphite-matrix coated-particle fuel. The FHR uses a once-through fuel cycle. The design minimizes used nuclear fuel volumes relative to other FHR and HTGR designs. The primary system is inside a secondary liquid salt–filled tank that (1) provides an added heat sink for decay heat, (2) helps to ensure no freezing of primary system salt, and (3) helps to ensure no major fuel failures in a beyond-design-basis accident. The refueling standpipes above each stringer fuel assembly in the AGR core with modifications can be used in an FHR for refueling and can provide efficient heat transfer between the primary system and the secondary liquid salt–filled tank. The passive decay heat removal system uses heat pipes that turn on and off at a preset temperature to avoid overheating the core in a reactor accident and to avoid freezing the salt coolant as decay heat decreases after reactor shutdown.</span>

Optimisation of AGR-Like FHR Fuel Assembly Using Multi-Objective Particle Swarm Algorithm

A Hybrid Non-Linear Time-Varying Double-Weighted Particle Swarm Optimization for Solving Non-Convex Combined Environmental Economic Dispatch Problem

Optimization of Fuel Cell Hybrid System Configuration Via Modified Multi-Objective Particle Swarm Algorithm

Multi-objective loading pattern optimization of a soluble boron free core using social spider algorithm

Preliminary analysis on in-core fuel management optimization of molten salt pebble-bed reactor

Design Optimization for Pressurized Water Reactor Using Improved Quantum Fish Swarm Algorithm and Intuitionistic Linguistic Decision-Making

Particle Swarm Optimization Applied to the Nuclear Fuel Bundle Spacer Grid Spring Design

Comparative study of meta-heuristic algorithms for reactor fuel reloading optimization based on the developed BP-ANN calculation method

A Hybrid Multi-Objective Optimization Method and Its Application to Electromagnetic Device Designs

The Optimization Design Of Lower Plenum And Distribution Plates In Msr

Hybrid Surrogate Model-Based Multi-Objective Lightweight Optimization of Spherical Fuel Element Canister

Multi‐objective optimization of solid oxide fuel cell/gas turbine combined heat and power system: A comparison between particle swarm and genetic algorithms

The AGR-like FHR reactor: Assessing the technical limits of the fuel

Control Parameter Optimization for AP1000 Reactor Using Particle Swarm Optimization

Integrating the Deep Learning and Multi-Objective Genetic Algorithm to the Reloading Pattern Optimization of HPR1000 Reactor Core

Fluoride-Salt-Cooled High-Temperature Reactor (FHR) Using British Advanced Gas-Cooled Reactor (AGR) Refueling Technology and Decay Heat Removal Systems That Prevent Salt Freezing

Hydrogen consumption minimization with optimal power allocation of multi-stack fuel cell system using particle swarm optimization

High-Fidelity Neutronics and Thermal-Hydraulics Analysis of Helical Cruciform Fuel Based on Small Modular Fhr

Optimization of a Fuel Assembly for Supercritical Water-Cooled Reactor CSR1000

Multi-Objective Optimization Design of TRISO-based Fully Ceramic Microencapsulated Fuel

Optimization of Multilayer Fuel Assemblies for Supercritical Water-Cooled Reactors with Mixed Neutron Spectrum