Abstract:Purpose: Thermoplastic masks keep patients in an appropriate position to ensure accurate radiation delivery. For a thermoplastic mask to maintain clinical efficacy, the mask should wrap the patient's surface properly and provide uniform pressure to all areas. However, to our best knowledge, no explicit method for achieving such a goal currently exists. Therefore, in this study, we intended to develop a real-time thermoplastic mask compression force (TMCF) monitoring system to measure compression force quantitatively. A prototype system was fabricated, and the feasibility of the proposed method was evaluated. Methods: The real-time TMCF monitoring system basically consists of four force sensor units, a microcontroller board (Arduino Bluno Mega 2560), a control PC, and an in-house software program. To evaluate the reproducibility of the TMCF monitoring system, both a reproducibility test using a micrometer and a setup reproducibility test using a head phantom were performed. Additionally, the reproducibility tests of mask setup and motion detection tests were carried out with a cohort of six volunteers. Results: The system provided stable pressure readings in all 10 trials during the sensor unit reproducibility test. The largest standard deviation (SD) among trials was about 36 gf/cm2 (∼2.4% of the full-scale range). For five repeated mask setups on the phantom, the compression force variation of the mask was less than 39 gf/cm2 (2.6% of the full-scale range). We were successful in making masks together with the monitoring system connected and demonstrated feasible utilization of the system. Compression force variations were observed among the volunteers and according to the location of the sensor (among forehead, both cheekbones, and chin). The TMCF monitoring system provided the information in real time on whether the mask was properly pressing the human subject as an immobilization tool. Conclusion: With the developed system, it is possible to monitor the effectiveness of the mask in real time by continuously measuring the compression force between the mask and patient during the treatment. The graphical user interface (GUI) of the monitoring system developed provides a warning signal when the compression force of the mask is insufficient. Although the number of volunteers participated in the study was small, the obtained preliminary results suggest that the system could ostensibly improve the setup accuracy of a thermoplastic mask.

Development of a test bench for ventilation masks through 2D and 3D printing processes

Development of personalized non-invasive ventilation masks for critically ill children: a bench study

A Physical Analog to Assess Surgical Face Mask Air Flow Resistance During Tidal Ventilation

Experimental determination of the contact pressures produced by a nasal continuous positive airway pressure mask: A case study

Benchtop Assessment of Sealing Efficacy and Breathability of Additively Manufactured (AM) Face Masks

Current Advances and Gaps in Knowledge on Personalizing Masks for Noninvasive Respiratory Support

Comparison of oronasal and nasal mask in home mechanical ventilation: observational cohort and bench study

An apparatus for nondestructive and rapid comparison of mask approaches in defense against infected respiratory aerosols

A retrospective characterization of pediatric facemasks marketed in the United States and implications for future designs

Application of 3D scanning and 3D printing for designing and fabricating customized half-mask facepieces: A pilot study

Performance assessment of medical and non-medical CPAP interfaces used during the COVID-19 pandemic

Development of a Real-Time Thermoplastic Mask Compression Force Monitoring System Using Capacitive Force Sensor

New physiological bench test reproducing nocturnal breathing pattern of patients with sleep disordered breathing

Redesign of an Open-System Oxygen Face Mask With Mainstream Capnometer for Children

Mask pressure effects on the nasal bridge during short-term noninvasive ventilation

A special face mask with integrated angle meter to optimize the head position for bag-valve-mask ventilation—a prospective simulated proof-of-concept study

Mask side-effects in long-term CPAP-patients impact adherence and sleepiness: the InterfaceVent real-life study

Neonatal Noninvasive Ventilation Nasal Mask Interface Pressure and the Inter-Individual Variation of Mask Placement

Design of customizable personal protective equipment for 3-D printing: Performance evaluation of N95 respirators using computational fluid dynamics

Comparative bench study evaluation of different infant interfaces for non-invasive ventilation

Neuroergonomic and psychometric evaluation of full-face crew oxygen masks respiratory tolerance: a proof-of-concept study