Abstract:An experimental and numerical investigation has been performed on the quantitative determination of two-stage heat transfer characteristics of constrained melting process of phase change material (PCM) inside a horizontal cylinder. Melting experiments are conducted with paraffin in a cylinder subjected to different boundary temperatures. The solid-liquid interface and temperature field of PCM are captured using photography and infrared technique, respectively, which are then used to validate the numerical models established based on the enthalpy method. A scale analysis is performed to estimate the order of magnitude of the influence factors. With the validated models, the melting processes of PCM inside a horizontal cylinder covering a wide range of Rayleigh number (Ra), Stefan number (Ste) and Fourier number (Fo) are simulated and analyzed carefully. It is found that the transition point between the conduction and convection stages depends greatly on the Rayleigh number while has little relation with the Stefan number. Particularly, three important Rayleigh numbers are identified: when Ra < 5.0 × 103, the PCM melted in the conduction stage is more than 90%, indicating that the natural convection effect on the melting heat transfer is very weak; when Ra > 3.3 × 107, the PCM melted in the convection stage is more than 90%, so the natural convection dominates the melting process; when Ra = 5.3 × 104, the PCM melted in conduction and convection stages are both equal to 50%. For the conduction stage, the heat transfer characteristics depend only on the dimensionless melting time (FoSte), while for the convection stage, the heat transfer characteristics depend not only on the Fourier and Stefan numbers, but also on the Rayleigh number. Based on the numerical and the scale analysis results, the correlation for the dimensionless transition melting time (FoSte)tr (which can be used to distinguish between the conduction stage and convection stage) as well as the correlations of liquid fraction (α) and Nusselt number (Nu) for the conduction and convection stages, respectively, are proposed. These correlations, with a wide application range of Rayleigh and Stefan numbers, agree well with the experimental and theoretical results from both present study and open literature, and can well predict the two-stage heat transfer characteristics of constrained melting in a horizontal cylinder.

Interfacial heat transfer and melt-front evolution at a Fractal Cantor structured interface under various PCM melting conditions

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

Numerical study on enhanced melting heat transfer of PCM by the combined fractal fins

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

A Novel Indirect Visualization Method for Studying the Melting Heat Transfer of Nano-Enhanced Phase Change Materials Using Thermochromic Liquid Crystal Thermography

Heat transfer during melting of graphene-based composite phase change materials heated from below

An Experimental Investigation of Constrained Melting Heat Transfer of Nano-Enhanced Phase Change Materials in a Horizontal Cylindrical Capsule Using Thermochromic Liquid Crystal Thermography

Melting behaviors of PCM in porous metal foam characterized by fractal geometry

Numerical Study on Melting Heat Transfer in Fractal Metal Foam

Numerical study on melting and heat transfer characteristics of vertical cylindrical PCM with a focus on the solid-liquid interface heat transfer rate

Dynamics of PCM Melting Driven by Spatially Varying Heat Load

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Lattice Boltzmann Simulation of Melting in a Cubical Cavity with a Local Heat-Flux Source

Two-stage Heat Transfer Characteristics of Constrained Melting Inside an Isothermally Heated Horizontal Cylinder

Analysis of heat transfer and fluid flow during the melting process of PCM within tubular thermal energy storage unit

Pore-scale study on Rayleigh-B acute accent enard convection formed in the melting process of metal foam composite phase change material

Pore scale simulation for melting of composite phase change materials considering interfacial thermal resistance

Pore-scale study on Rayleigh-Bénard convection formed in the melting process of metal foam composite phase change material

Experimental Study on Pressure-Enhanced Close Contact Melting with PCMs for Stable Temperature Control of High Heat Flux Electronic Devices

Experimental investigation of the effect of external forces on convection-driven melting of phase change material in a rectangular enclosure

Lattice Boltzmann Simulation of Melting Heat Transfer in a Composite Phase Change Material