Abstract:Metal-oxidizer nanocomposites have recently attracted attention as potential gas-generating energetic materials (EMs) that can replace or augment common CHNO compounds in selected applications. Experimentalists use enclosed chambers to ignite charges of metal-based EM and report pressures, P . Unfortunately, the reported pressures cannot be compared directly between studies because of differences in the chamber volume, V , and mass, m , of the EM used in different experiments. A parameter P·V/m , proportional to the released energy available for mechanical work is proposed to harmonize the reported experimental data. This parameter is both predicted using thermodynamic equilibrium analysis (here, employing a well-known and readily available NASA CEA code) and recovered from published experimental data. Calculations also determine the adiabatic flame temperature, T , and molar amounts of the generated gas products, n , which are not easily obtained from experiments. Comparisons of calculations with experimental data suggest that some Al-based nano-thermites with CuO and MoO 3 as oxidizers have achieved their theoretical performance levels, at least in small scale tests. Similarly, in some Al-ammonium nitrate EMs, theoretically predicted pressures have been observed experimentally. Available experimental data for B-based EMs suggest that all such EMs can be improved to achieve energetic performance closer to that predicted by thermodynamic equilibrium calculations. Calculating P·V/m and n/m for EMs with varied fuel/oxidizer ratios and different charge mass normalized per volume, m/V , offers an approach for designing thermodynamically optimized EM compositions with performance maximized at the temperature ranges of interest and achievable in practical scenarios. Finally, calculations also show that for both Al and B as fuels, ammonium nitrate is superior as an oxidizer in terms of both gas generation and ability to perform work. These benefits are despite somewhat lower adiabatic flame temperatures, e.g., compared to the analogous EMs using ammonium perchlorate as an oxidizer.

Investigation of energetics of 1:1 stoichiometric Al/PVP-fuel and nc-CeO2-oxidizer nanocomposite material

Investigation on Thermal Properties of a Novel Fuel Blend and Its Diesel Engine Performance

Core-Shell Al-Polytetrafluoroethylene (PTFE) Configurations to Enhance Reaction Kinetics and Energy Performance for Nanoenergetic Materials.

Improved ignition and combustion performances of aluminum nanoparticles by in-situ partial conversion of native alumina to surface Al-MOF shell

A Promising Strategy to Obtain High Energy Output and Combustion Properties by Self-Activation of Nano-Al

THERMAL REACTIVITY OF AL/FE CORE−SHELL NANOCOMPOSITES

Molecular Combustion Properties of Nanoscale Aluminum and Its Energetic Composites: A Short Review

Nanoenergetic Materials: Enhanced Energy Release from Boron by Aluminum Nanoparticle Addition.

Evaluation and design of metal-based gas-generating energetic materials

Energetic Metastable N-Al@pvdf/emof Composite Nanofibers with Improved Combustion Performances

Unraveling the Effect of MgAl/CuO Nanothermite on the Characteristics and Thermo-Catalytic Decomposition of Nanoenergetic Formulation Based on Nanostructured Nitrocellulose and Hydrazinium Nitro-Triazolone

A Favorable Improvement in Reactivity Between N-Al and Sheet-like Porous CuO As a Nanoenergetic Composite by Graphene Oxide Additives

Combustion of Aluminum Nanoparticles and Exfoliated 2D Molybdenum Trioxide Composites

Nanostructured Al/Ni Energetic Composites: Processing, Reaction Properties and Activation Energy

Fabrication and Mechanistic Study of AP/nAl/PTFE Spherical Encapsulated Energetic Materials with Enhanced Combustion Performance

Enhanced energy performance from core–shell structured Al@Fe2O3 nanothermite fabricated by atomic layer deposition

Combustion Characteristics of Oxygenated Slurry Droplets of Nano-Al/etoh and Nano-Al/tpgme Blends

A comprehensive combustion, performance, and environmental analyses of algae biofuel, hydrogen gas, and nano-sized particles (liquid-gas-solid mix) in agricultural CRDI engines

Efficient Oxidative Decomposition of Jet-Fuel exo-Tetrahydrodicyclopentadiene (JP-10) by Aluminum Nanoparticles in a Catalytic Microreactor: An Online Vacuum Ultraviolet Photoionization Study

Nanoenergetic Materials: from Materials to Applications

Thermal and combustion behavior of Al-MnO2 nanothermite with poly(vinylidene fluoride -co- hexafluoropropylene) energetic binder