Abstract:Abstract: The most prevalent and widely used building material in the world is reinforced concrete. The primary building material for the majority of constructions, including buildings, bridges, etc., is reinforced concrete. Because of various factors, some of these buildings or portions of them are failing to perform as designed. The best solution to increase the load carrying capacity and extend the useful life of these inadequate structures is to strengthen them because replacing them would need significant investments and not be an appealing alternative. Even though the effectiveness of other techniques is widely accepted,a new effective and promising technique of strengthening civil engineering structures externally is gaining popularity, where fibre-reinforced polymer (FRP) is used. One of the most popular strengthening methods recently is the use of carbon fibre reinforced polymer (CFRP) to strengthen reinforced concrete beams. It provides a desirable way to improve the shear and flexural strengths of RC beams. The manner in which these composites are bonded to the beam has a significant impact on the behaviour of reinforced concrete beams in shear and flexure. The purpose of this study was to present a three-dimensional nonlinear finite element analysis (FEA) of a reinforced concrete beam (RC beam) reinforced by prestressed carbon fibre plate (CFRP plate). While there are many commercial programmes available for three-dimensional nonlinear FEA, each one has a unique ability to represent complex behaviour of composite materials, such as RC beams strengthened with prestressed CFRP plate and the contact interaction. Because of its reputation for accuracy in simulating the behaviour of a range of materials, including concrete, and its potent contact algorithms, the ABAQUS finite element programme was chosen for this work. Steel reinforcements were modelled as elastic- perfectly plastic materials, while concrete was studied using the concrete damage plasticity (CDP) constitutive model. The CFRP plate was modelled as an entirely elastic substance that breaks under the highest tensile strain. Concrete and steel reinforcement were considered to have a perfect connection, and the behaviour of concrete and CFRP plate was represented using a contact model. The FEA's findings were verified against experiment findings that were published in the literature. In terms of load-deflection behaviour, crack patterns, and mode of failure, the results were compared. The proposed FEA model was able to accurately simulate the behaviour of RC beams strengthened with prestressed CFRP plate based on the validation. To find out the impact of the thickness, width, and length of the CFRP plate, as well as the prestressing levels and steel grades, a parametric research was done. In particular, the strength of the RC beam for the ultimate load was shown to be increased by increasing prestressing of the CFRP plate. However, as prestressing increased, the fracture of the CFRP plate altered the mechanism of failure, preventing the ultimate load from increasing further. The use of higher grade steel improved the ability to support additional weight. Although the general load carrying capability of the CFRP plate was increased by lengthening the plate, it was discovered that strengthening RC beams by 25% of their shear span was sufficient and cost- effective. The load-deflection curve, failure modes, and crack patterns from the experiments are fairly reflected in the FE model.

New analytical models to predict the mechanical performance of steel fiber‐reinforced alkali‐activated concrete

Mechanical Properties of SFRC: Database Construction and Model Prediction

Flexural capacity prediction of steel fiber reinforced concrete beam with recycled fine and coarse aggregate

Experimental investigation on the flexural performance and damage process of steel fiber reinforced recycled coarse aggregate concrete

Bending Performance of Steel Fiber Reinforced Concrete Beams Based on Composite-Recycled Aggregate and Matched with 500 MPa Rebars

Investigation of basic properties, microscopic characteristics, and optimized ratio prediction model of ultra-high steel fiber reinforced concrete

A modeling strategy for the shear and flexural performance prediction of SFRC beams without stirrups accounting for the variability of properties

Constitutive Model of FRP Tube-Confined Alkali-Activated Slag Lightweight Aggregate Concrete Columns under Axial Compression

Assessment of Flexural and Splitting Strength of Steel Fiber Reinforced Concrete Using Automated Neural Network Search

Empirical equations for flexural residual strengths in concrete with low volumetric fractions of hook‐end steel fiber

Mechanical properties and corrosion resistance of high performance fiber-reinforced concrete with steel or amorphous alloy fibers

Strength Prediction of Self-Consolidating Concrete Containing Steel Fibre with Different Fibre Aspect Ratio

Calculation Method for the Cracking Resistance and Bearing Performance of SFRAC Beams

Mechanical performance and numerical simulation of high-performance steel fiber reinforced concrete

Mechanical behavior of multiscale hybrid fiber reinforced recycled aggregate concrete subject to uniaxial compression

Mechanical characterization of SFRC with annealed and galvanized steel fibers by different test typologies

Mechanical properties, flexural behavior, and chloride permeability of high-performance steel fiber-reinforced concrete (SFRC) modified with rice husk ash and micro-silica

3D mesoscale modelling of steel fiber-reinforced aggregate concrete

Effect of different fiber reinforcements on the strength and acid attack resistance of alkali-activated concrete

Experimental Study and Numerical Modelling on Flexural and Shear Strengthening of RC Beam with Prestressed FRP Bars

Tensile strength and flexural behavior of steel fiber‐reinforced concrete beams