Abstract:The building sector is one of the largest contributors to carbon emissions globally, with high-rise office buildings being a major source due to their energy-intensive operations. This study aims to address the critical issue of carbon emission reductions through the retrofitting of existing high-rise office buildings, focusing on the entire life cycle of these buildings, including the embodied, operational, and demolition phases. Existing research has primarily concentrated on energy consumption and carbon emissions during the operational phase, neglecting the carbon impact of the retrofitting process itself. This research seeks to fill that gap by quantifying the carbon reduction benefits of retrofitting across all life-cycle stages. Using data from 100 high-rise office buildings in Hangzhou's Gongshu District, five typical models were extracted based on their construction eras and architectural features. Retrofitting strategies tailored to these models were developed, and the carbon reduction benefits were calculated using the carbon emission factor method. The primary findings indicated that the shape and orientation of buildings are crucial factors influencing the carbon reduction benefits of retrofitting. Buildings oriented east–west tend to exhibit greater carbon reductions after retrofitting. During the embodied and demolition phases, retrofitting emissions remain similar for models constructed in the same era due to consistent material inputs. However, emissions vary for models from different eras, primarily due to differences in envelope materials and subsequent material consumption. High-rise office buildings constructed between 2007 and 2021 demonstrate higher overall retrofit carbon reduction rates compared to those built before 2007, despite the latter achieving greater reductions during the operational phase. The shorter remaining lifespans of pre-2007 buildings diminish their life-cycle carbon reduction advantages. Notably, complex-shaped buildings from the same era do not necessarily exhibit lower overall retrofit carbon reduction rates compared with rectangular or L-shaped buildings, with comparable reductions per unit area. This suggests that complex-shaped buildings should not be disregarded for retrofitting based solely on shape considerations. Furthermore, the remaining lifespan of a building significantly impacts its post-retrofitting carbon reduction benefits; longer lifespans result in greater benefits, and vice versa. In practical engineering applications, structural reinforcement measures can be implemented prior to retrofitting to extend a building's structural lifespan, ultimately enhancing its carbon reduction benefits.

Assessing the Impact of Façade Typologies on Life Cycle Embodied Carbon in University Building Retrofits: A Case Study of South Korea

Life cycle assessment for carbon emission impact analysis for the renovation of old residential areas

Environmental Life Cycle Costing at the Early Stage for Supporting Cost Optimization of Precast Concrete Panel for Energy Renovation of Existing Buildings

Life cycle greenhouse gas emission and cost analysis of prefabricated concrete building façade elements

A Holistic Framework for Determining the Trade-off between Embodied and Operational Carbon Emissions of High-rise Residential Buildings

Carbon emission measurement of the envelope of a university teaching building in Hefei City

Adapting for shared use – evaluating the lifecycle carbon impact

On the tradeoffs between embodied and operational carbon in building envelope design: The impact of local climates and energy grids

A Study on Carbon Emission Reduction in the Entire Process of Retrofitting High-Rise Office Buildings Based on the Extraction of Typical Models

Comparative Cradle-to-Grave Carbon Footprint of a CFRP-Grid Reinforced Concrete Façade Panel

Energy optimization for Façade retrofit design of residential buildings in hot climates using advanced materials

Energy and carbon balance of materials used in a building envelope renovation

Retrofit or rebuild? The future of old residential buildings in urban areas of China based on the analysis of environmental benefits

Life-Cycle Assessment of an Office Building: Influence of the Structural Design on the Embodied Carbon Emissions

Selecting Building Façade Materials by Integrating Stepwise Weight Assessment Ratio Analysis and Weighted Aggregated Sum Product Assessment into Value Engineering

Protective energy-saving retrofits of rammed earth heritage buildings using multi-objective optimization

Heating energy savings potential from retrofitting old apartments with an advanced double-skin façade system in cold climate

Low- carbon design strategies for new residential buildings – lessons from architectural practice

Quantification of the Improvement in Sustainability after a Comparative Experimental Study of Single-Family Homes with Façade Rehabilitation Using the External Thermal Insulation Composite System

Energy retrofit technology for modern and contemporary educational historical buildings considering preservation and utilization aspects

Mitigation Strategies for Reduction of Embodied Energy and Carbon, in the Construction Systems of Contemporary Quality Architecture