Abstract:In rock materials, the intergranular structure is more affected by various external conditions than the transgranular structure, and then dominates the macroscopic mechanical properties of rocks. In this paper, an innovative three‐dimensional grain‐based model based on Particle Flow Code (PFC3D‐GBM) for reproducing granite crystalline structures was developed. Based on this model, the Brazilian splitting test was conducted to investigate the effects of intergranular contact (IC) bonding strength on the mechanical properties and micro‐cracking behavior of the granite. Additionally, in this paper, the force chains and the orientation distribution of the force chains are shown in the form of three‐dimensional rose diagrams. The results are compared to the numerical results obtained by an initial particle‐based model to demonstrate the superiority of the proposed PFC3D‐GBM. The results indicate that the stress–strain curve of the sample in the Brazilian splitting test can be classified into four distinct stages: initial compaction, linear elasticity, damage, and splitting failure. ICs fracture at a higher rate than transgranular contacts (TCs) under static loading, as evidenced by experimental results of laboratory tests; during the entire loading process, all force chains uniformly distribute in all directions of a sample. As the external load increases, the number of total force chains decreases and the number of cracks increases. The main orientation of the high‐strength force chains is consistent with the external loading direction and is vertical with respect to the main orientation of the cracks. Furthermore, the number of high‐strength force chains increases with the level of external load. The sample's failure mechanism in the Brazilian splitting test is always a tensile failure, and this characteristic is unaffected by the modeling method or the IC bonding strength. Both the tensile strength and peak strain increase as the IC bonding strength increases. In this process, the number of total cracks in PFC3D‐GBM decreases, the proportion of transgranular cracks (Tcs) increases, and the proportion of intergranular cracks (Ics) decreases. The micro‐cracking behavior described above based on the PFC3D‐GBM can be explained more rationally. As the bonding strength of the IC increases, the particles involved in sample deformation are subjected to a greater stress concentration prior to the sample experiencing macro‐fracture, leading to an increase in the number of high‐strength force chains, which is the fundamental reason for the increase of the sample's tensile strength.

Experimental and GBM3D study on the failure mechanical behavior of granite with different grain sizes under conventional triaxial compression

Uniaxial Compressive Behavior of Granite at High Strain Rates

Experimental Investigation and Semi-Analytical Simulation of Instantaneous and Time-Dependent Damage Behaviors of Beishan Granite

Investigation of the Quasi-Brittle Failure of Alashan Granite Viewed from Laboratory Experiments and Grain-Based Discrete Element Modeling

Experimental and numerical investigation on meso -fracture behavior of Beishan granite subjected to grain size heterogeneity

Numerical investigation of the effects of the micro-parameters of the transgranular contact on the mechanical response of granite

Numerical investigation on the effect of intergranular contact bonding strength on the mechanical properties of granite using PFC3D‐GBM

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Numerical investigation of the effect of grain size-to-particle size ratio on the dynamic fracture toughness of granite by using PFC3D-GBM

Modeling Crack Propagation in Heterogeneous Granite Using Grain-Based Phase Field Method

The sensitivity of mechanical properties and pore structures of Beishan granite to large variation of temperature in nuclear waste storage sites

Experimental Study on Mechanical Properties and Failure Laws of Granite with Artificial Flaws under Coupled Static and Dynamic Loads

Experimental research on the mechanical properties and energy transfer of fractured granite under triaxial loading

An Experimental and Modeling Investigation on Creep Mechanical Behavior of Granite Under Triaxial Cyclic Loading and Unloading

Numerical simulations on the structural heterogeneity and fracture bias effect of three-point bending specimen

Experiment and numerical simulation study of dynamic mechanical behavior of granite specimen after high temperature treatment

Modeling Damage Evolution in Heterogeneous Granite Using Digital Image-Based Grain-Based Model

Experimental investigation on mechanical behaviors of Nanan granite after thermal treatment under conventional triaxial compression

Microcracking behavior and damage mechanism of granite subjected to high temperature based on CT-GBM numerical simulation

Modelling Thermo-hydro-mechanical (THM) Effect on the Hydro-mechanical Properties of Granite in Disposal System Using an Improved Meso-structure-Based DEM Model

Mechanical properties of granite at high temperature subjected to true triaxial compression