Abstract:We report here a detailed characterization of the surface chemical states and morphology of polyimide (PI) films following modifications by plasma treatment and electroless copper deposition. NH3 and Ar plasma treatments have been successfully used to achieve morphological and chemical modification of the PI surface so that electroless copper plating can occur. The adhesion strength of the electroless copper to the PI surface was measured and correlated with the plasma-induced chemical and physical modifications of the PI surface. The NH3 plasma causes primarily chemical changes to the PI surface through creation of nitrogen moieties (i.e., –N =C< ) on the surface. The Ar plasma treatment brings about mainly physical changes to the surface (i.e., surface roughening). The combined-plasma treatment (Ar plasma followed by NH3 plasma) combines the desirable chemical and physical effects of each treatment, yielding a PI surface with higher roughness for physical anchoring of the copper and surface bonding sites (nitrogen and oxygen sites). During the electroless copper surface activation step with tin chloride and palladium chloride, tin bonds mainly with the oxygen on the surface, whereas palladium reacts with tin chloride as well as with the surface nitrogen. A direct relationship has been observed between surface palladium concentration and the abundance of the –N =C< sites on the surface. This suggests that the nitrogen radicals created during the NH3 plasma are incorporated into the surface and serve as bonding sites for the palladium. In the subsequent electroless Cu deposition, there was a direct correlation between the palladium surface concentration and Cu coverage. The adhesion strength of the electroless copper to the PI correlated well to the surface modifications and plasma treatment conditions. For the first time, a specific bonding configuration on the PI surface is shown to promote adsorption of palladium, which in turn promotes covalent bonding with Cu. The relative importance of surface roughness and chemical bonding on the adhesion strength is discussed.

Plasma in Liquids induced modification of Cu surfaces

Self-Organizing Sub-μm Surface Structures Stimulated by Microplasma Generated Reactive Species and Short-Pulsed Laser Irradiation

Nonthermal Plasma-Assisted Catalytic Oxidation of Carbon Monoxide over CuOx@γ-Al2O3: Understanding Plasma Modification of Catalysts and Plasma–Catalyst Synergy

Atmospheric-pressure microplasma as anode for rapid and simple electrochemical deposition of copper and cuprous oxide nanostructures

Electrochemical CO2 reduction to gaseous methane and carbon monoxide using plasma-synthesized copper nanowires

CuO: Synthesis in a Highly Excited Oxygen-Copper Plasma and Decoration of ZnO Nanorods for Enhanced Photocatalysis

Enhanced moisture resistance of Cu/Ce catalysts for CO oxidation via Plasma-Catalyst interactions

Dynamics of bulk and surface oxide evolution in copper foams for electrochemical CO2 reduction

Enhanced moisture resistance of Cu/Ce catalysts for CO oxidation via Plasma-Catalyst interactions.

Obtaining nanoparticles of Cu2O by means of a pulsed discharge of CH3CH2OH-N2

In situ characterization of Cu-Co oxides for catalytic application

Operando Plasma-XPS for Process Monitoring: Hydrogenation of Copper Oxide Confined Under h-BN Case Study

Characterizing the Stability of Ultra-Thin Metal Oxide Catalyst Films in Non-thermal Plasma CO2 Reduction Reactions

Cu2In alloy-embedded ZrO2 catalysts for efficient CO2 hydrogenation to methanol: promotion of plasma modification

Speciation of Cu Surfaces During the Electrochemical CO Reduction Reaction.

Thermal Plasma‐Induced Surface Modifications Correlated With the Field Emission Properties of Copper

Plasma oxidation as an effective method in etching copper interconnect lines at room-temperature

Plasma Treatment and Surface Analysis of Polyimide Films for Electroless Copper Buildup Process

Plasma Surface Treatment of Cu Current Collectors for Improving the Electrochemical Performance of Si Anodes

Structuring Of Copper Surface By Glow Discharge Plasma

Operando surface chemistry of micro- and nanocubic copper catalysts for electrochemical CO2 reduction