Radial hydro-forging bending: A novel method to reduce the springback of AHSS tubular component

Caiyuan Lin,Guannan Chu,Lei Sun,Gang Chen,Peixing Liu,Weihua Sun

DOI: https://doi.org/10.1016/j.ijmachtools.2020.103650

IF: 10.331

2021-01-01

International Journal of Machine Tools and Manufacture

Abstract:<p>A novel forming technology, designated as "radial hydro-forging bending (RHFB)", was introduced to alleviate the complication of springback in advanced high-strength steel (AHSS) bent tubular components. Its mechanics principle is based on applying deformation compression along the circumferential direction of the tube cross-section, by radial compression displacement of the die, whose effectiveness is far better than the traditional springback compensation. Subsequently, due to the subsequent yield induced by circumferential compression, the axial stress is entirely changed to compressive stress, eliminating the axial stress difference caused by bending, thereby reducing the springback. The mechanics conditions needed for springback is eliminated, as a result, the technology is affected little by the fluctuation of material properties (overcome the influence of the variable material properties for AHSS). The development progress of axial stress was studied, and the two characteristic stages of springback change rule were clarified accordingly. Mechanics principle for the critical compression displacement was explained by revealing the asynchrony of the axial stress change, and further gave the influence of the bending radius and material properties on it. A special hydro-forging machine was designed to achieve automatic balance control of the internal pressure and clamping displacement. For AHSS with strength of 600 MPa and 800 MPa, the springback could be reduced by more than 95% after RHFB. In this work, our proposed innovative process of RHFB is meticulously demonstrated, in an effort to efficiently control the springback in AHSS bent tubular components.</p>

engineering, mechanical, manufacturing