Abstract:The as-laid embedment is a key design element of deep-water pipelines, as it significantly affects the longitudinal and transverse pipe-soil interaction and thermal insulation. Due to the small-amplitude oscillations driven by the sea state as well as lay vessel motions, the as-laid embedment is significantly greater than the predictions derived from static penetration analyses. This paper presents a numerical study into the cyclic embedment behavior of deep-water pipelines in soft clay using a recently developed sequential limit analysis (SLA) technique. It directly models the evolution of model geometry and material properties through a consecutive series of small displacement analyses and incorporates the effect of strain softening and strain rate on soil strength. A rigid plane-strain pipe section is pushed-in-place and then subjected to small-amplitude cyclic lateral displacements, with an accumulated lateral pipe displacement of up to 60 diameters. Careful comparisons between the numerical results with published centrifuge data are provided to demonstrate the robustness of SLA, in terms of pipe invert trajectory and soil resistance, followed by an extensive parametric study investigating the effect of strain rate, strain softening, oscillation amplitude, and loading history. More detailed aspects of the cyclic loading behavior are discussed with reference to soil failure mechanisms and bearing capacity yield envelopes. A strong correlation between accumulated lateral pipe displacement and pipe embedment is identified, regardless of the varying oscillation amplitudes, and soil buoyancy is found to play the most significant role in determining the final pipe embedment. The present study aims to assist the development of a macro-element plasticity pipe-soil model that can be incorporated into simplified three-dimensional (3D) pipeline-seabed models, as well as to promote the application of SLA to model complex large-displacement pipe-soil interaction problems.

A novel empirical model for peak strain prediction of pipelines under circular landslides

An analytical solution for landslide impact on buried continuous pipelines

A Simplified Analytical Solution of Pipeline Response under Normal Faulting

Assessment Model of Pipe–soil Interaction During Large-Amplitude Lateral Displacements for Deep-Water Pipelines

Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

A Refined Analytical Model for Landslide or Debris Flow Impact on Pipelines – Part II: Embedded Pipelines

Modelling and Analysing Failure Modes of Buried Pipelines Perpendicularly Crossing Landslide Boundaries

Numerical Study of Landslide Impact on Submarine Pipelines

Method of strain analysis of pipelines under landslides: An improved semi-analytical method for softening bending moment-curvature

A refined analytical model for landslide or debris flow impact on pipelines. Part I: Surface pipelines

Sensitivity analysis and failure prediction of X80 pipeline under transverse landslide

Numerical model for pipeline laying during S-lay

A new analytical method for calculating the strain of oil and gas pipeline under a normal fault dislocation

Numerical Analysis for Pipeline Installation by S-Lay Method

Elastoplastic Pipe-Soil Interaction Analyses of Partially-Supported Jointed Water Mains

Pipeline Lateral Buckling Triggered by the Residual Curvature with Tri-Linear Axial Pipe-Soil Interaction

Analytical Prediction of Pipeline Behaviors in J-Lay on Plastic Seabed

Probabilistic Analysis of Pipelines in Geohazard Zones Using a Novel Approach for Strain Calculation

Using Finite Element Method for Stress-Strain Evaluation of Commonly Used Buried Pipelines in Fault

Performance evaluation of underground pipelines subjected to landslide thrust with fiber optic strain sensing nerves