Abstract:This article proposes an approximate prediction method for slamming loads in parametric rolling condition for large container ships and the method has been validated through model experiments. Up to now, there have been some studies focused on two-dimensional asymmetric slamming analysis. Nevertheless, slamming load prediction in parametric rolling condition should consider not only heave and pitch motions, but also large amplitude roll motion which is usually neglected in analysis. For this purpose, a 6-DOF weakly nonlinear time domain model is adopted to predict the ship motions including parametric roll motion. The consequent roll motions obtained by the proposed model are incorporated in the calculation of impact angle and relative vertical velocity between ship section on the bow flare and wave surface, according to an asymmetric water entry assumption. Slamming impact loads and occurrence probability of slamming are analyzed by the Wagner model. To validate the numerical method, the segmented model experiment of a 10000 TEU container ship was executed and the slamming impact pressures and bending moments were measured for the wave condition and ship forward speed. The calculated pressures are compared with experiments. Based on numerical simulations, the maximum flare slamming pressures and slamming occurrence probability in different speed and wave conditions are investigated. The results indicate that flare slamming pressure is smaller than bottom slamming, but possessing longer lasting time and the occurrence of flare slamming is associated with the cycles of parametric rolling motions. Furthermore, the relationship between slamming pressure and 3-DOF motions namely roll, pitch and heave in the simultaneous simulation is given and the mechanism of flare slamming phenomena in parametric rolling condition is elaborated.

Stochastic assessment of acceleration probability density function for parametric rolling using the moment method

Stochastic Assessment of Acceleration Probability Density Function for Parametric Rolling Using Moment Method

Probability density function of roll amplitude for parametric rolling using moment equation

First Passage Probability of Nonlinear Ship Rolling in Random Seas

Effect of Calculation Methods of Roll Moment of Inertia on Sensitivity Prediction of Parametric Rolling for Container Ships

Influence of wind load on predicting parametric rolling of real ship

Validation of Theoretical Estimation Methods and Maximum Value Distribution Calculation for Parametric Roll Amplitude in Long-Crested Irregular Waves

Approximation Method for Flare Slamming Analysis of Large Container Ships in Parametric Rolling Conditions

Application of linear filter and moment equation for parametric rolling in irregular longitudinal waves

Analytical Evaluation of First Passage Failure for Nonlinear Ship Rolling Excited by Random Wave

Comparison of stochastic stability boundaries for parametrically forced systems with application to ship rolling motion

On the Short-Term and Long-Term Acceleration Failure Probability of a Container Ship in Irregular Waves

NUMERICAL MODELLING AND STUDY OF PARAMETRIC ROLLING FOR C11 CONTAINERSHIP IN REGULAR HEAD SEAS USING CONSISTENT STRIP THEORY

Numerical Prediction And Experimental Validation Of Slamming Load For Large Container Ship Undergoing Parametric Rolling Motion

Research on the parametric rolling of the KCS container ship

Comprehensive Calculation and Safety Assessment of Parametric Roll of Very Large Container Ship

A Study On Applicability Of Cfd Approach For Predicting Ship Parametric Rolling

On the estimation of the design loads on container stacks due to excessive acceleration in adverse weather conditions

A Study of Hybrid Prediction Method for Ship Parametric Rolling

Parametric Roll Prediction of the KCS Containership in Head Waves with Emphasis on the Roll Damping and Nonlinear Restoring Moment

Stochastic response estimation of wind-excited structures with multiple uncertain parameters