Wenhui Feng,Zhi Yee Ng,Han Chen,Jiasong Zhang,Dan Xu,Ying He,Hongyuan Wei,Leping Dang
Abstract:In order to apply precipitated calcium carbonate (PCC) in the detergent industry, its ability to deposit calcium ions in hard water is an important process. In this work, the calcium ion deposition in the presence of PCC from different sources is investigated to reveal the influencing factors and mechanism of nucleation and crystal growth of CaCO3. SEM, XRD, Malvern particle size analysis, and calcium electrodes are used to evaluate the effects of PCC morphology, saturation of Ca2+, and PCC additive amount on the deposition behavior of CaCO3. Through SEM and Malvern particle size analysis, it is found that the precipitation of calcium ions is obviously accelerated by PCC acting as seeds. Moreover, calcium ions are effectively adsorbed on (211) crystal facets, thus prismatic and scalenohedral PCC crystals exhibit better adsorption performance than irregular cubic PCC ones. In addition, XRD demonstrates that PCC reduces or even eliminates the formation of crystals such as vaterite, displaying high deposition capacity under complex water conditions (slightly acidic or highly alkaline pH, low magnesium ion concentration (<0.01 M), and temperatures of 0–60 °C), forming thermodynamically stable calcite in water, which significantly controls the instability of the washing process.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the ability of precipitated calcium carbonate (PCC) to deposit calcium ions in hard water when applied in the detergent industry. Specifically, the research aims to explore the influencing factors and mechanisms of PCC from different sources on calcium ion deposition, especially during the nucleation and crystal growth processes. The research evaluated the effects of factors such as PCC morphology, Ca\(^{2+}\) saturation, and PCC dosage on the CaCO\(_3\) deposition behavior by means of SEM, XRD, Malvern particle size analysis, and calcium electrodes.
### Research Background and Problems
1. **Requirements in the Detergent Industry**
- Detergents usually contain about 20% - 55% glidants, which not only significantly improve the fluidity of detergents but also ensure water softening.
- Common non - phosphorus detergent builders such as sodium carbonate (Na\(_2\)CO\(_3\)), although having good calcium removal and detergency performance, will form insoluble calcium carbonate deposits in hard water, affecting the washing effect.
2. **Challenges in Hard Water Softening Methods**
- Common hard water softening methods include ion exchange, boiling, additives, membrane separation, adsorption, and seed - induced methods, etc., but the application of these methods in detergents still faces challenges.
- For example, zeolite can be used as an ion exchanger to remove metal ions in water and improve powder fluidity, but its non - degradability and high cost limit its wide application.
3. **Application Potential of PCC**
- As a potential glidant, PCC has high purity, controllable properties, and good chemical absorption performance, and its low solubility has little impact on water quality.
- Industrial waste gas (CO\(_2\)) is increasingly used in PCC production, which is conducive to the development of the circular economy.
### Research Objectives
- **Evaluate the Calcium Ion Deposition Ability of PCC**: Select six PCC samples with different sources and surface characteristics to evaluate their calcium ion deposition abilities in hard water.
- **Explore Influencing Factors**: Through experimental design, explore the effects of factors such as water temperature, pH value, and magnesium ion concentration on CaCO\(_3\) crystallization.
- **Reveal the Mechanism**: Based on the experimental results, discuss the surface nucleation of the exposed crystal planes of PCC and the CaCO\(_3\) crystal growth mechanism.
### Methods and Techniques
- **Materials and Methods**
- Use reagents such as CaCl\(_2\)·2H\(_2\)O, Na\(_2\)CO\(_3\), and MgCl\(_2\)·6H\(_2\)O to prepare hard water and simulate the washing environment.
- Characterize by means of SEM, XRD, Malvern particle size analysis, and calcium electrodes.
- **Experimental Design**
- Adopt Box - Behnken design (BBD) for response surface method (RSM) analysis to explore the relationships among factors such as temperature, pH value, and magnesium ion concentration.
### Results and Discussions
- **Morphology and Crystalline Forms of PCC**
- Different types of PCC exhibit different morphologies, such as prismatic, cubic, and orthorhombic systems, etc.
- XRD analysis shows that all PCC are in calcite form with high crystallinity.
- **Influencing Factors of Calcium Ion Deposition**
- Morphology: The morphology of PCC determines whether adsorption occurs and the degree of adsorption. Prismatic and orthorhombic PCC show better adsorption performance.
- Supersaturation and PCC Dosage: An increase in supersaturation will cause the deposition behavior to change from growth - dominated to nucleation - dominated, affecting the deposition mechanism.
- **Effective Deposition Ability**
- Evaluate the effective deposition ability of PCC through indicators such as PSD analysis and total calcium deposition rate (D\(_{\text{Tot}}\)).
### Conclusions
- This research provides theoretical guidance for the application of PCC in the detergent industry, especially for in - depth understanding of the ability of PCC to deposit calcium ions in hard water, as well as its influencing factors and mechanisms. This helps to develop more effective water softening methods and improve the performance of detergents.