Abstract:Terahertz band has become a promising research field due to its advantages such as high frequency and large available bandwidth. In this paper, we realized the transmission of the 325 GHz 30 Gbaud terahertz quadrature phase shift keying (QPSK) signal with a bit error ratio (BER) less than the 7% hard-decision forward-error-correction (HD-FEC) threshold of 3.8 103, and 325 GHz 16 Gbaud 16-ary quadrature amplitude modulation (16QAM) signal with a BER less than the 20% soft-decision forward-error-correction (SD-FEC) threshold of 2.0 102 over 1 m metallic hollow core fiber. In addition, the performances of the metallic hollow core fiber transmission system under different frequencies from 300 to 380 GHz have also been measured. With the help of the Volterra nonlinearity compensation (VNC) algorithm, the highest net transmission rate can be up to 140.625 Gbit/s for 300 GHz 30 Gbaud 64QAM signal with satisfying the 28% spatially coupled low density parity check (SC-LDPC) threshold of 5.2 102. By comparing the performances of the metallic hollow core fiber transmission system and wireless transmission system, we also proved the superiority of the hollow core fiber to transmit terahertz signals. The experimental results show that compared with the commonly used free space transmission, the hollow core fiber can be a promising candidate to transmit high-frequency terahertz signals with a high speed and a low loss, and is worthy of further study in the future.

High-Power Analog Radio-Over-Fiber Transmission Using a Hollow-Core Photonic Bandgap Fiber

Converged Wireline and Wireless Access Over a 78-km Deployed Fiber Long-Reach WDM PON

100-Gbps Hybrid Optical Fiber-Wireless Transmission

Experimental Characterization of A Hybrid Fiber-Wireless Transmission Link in the 75 to 110 Ghz Band

3.125 Gb/s Impulse Radio Ultra-Wideband Photonic Generation and Distribution Over a 50 km Fiber With Wireless Transmission

8×250 Gbit/s PAM4 Transmission over 1 Km Single Mode Fiber with an All-Silicon LAN WDM Transmitter.

Composition-ratio influence on resistive switching behavior of solution-processed InGaZnO-based thin-film.

High-Speed Signal Transmission at W-Band over Dielectric-Coated Metallic Hollow Fiber

Transmission of Microwave-Photonics Generated 16gbit/s Super Broadband OFDM Signals in Radio-over-fiber System

Low-Latency 100 Gb/s PAM-4 PON with 42.5 Db Power Budget over 20 Km Anti-resonant Hollow-core Fiber

Photonics-Aided 32-Gb/s Wireless Signal Transmission over 1 Km at K-Band

Hollow-core photonic crystal fibers for Power-over-Fiber systems

13.4-Tb/s WDM Transmission over 1,280 km Repeated only with PPLN-based Optical Parametric Inline Amplifier

Error-Free and Laser-Phase-Noise-Insensitive Optical Coherent Transmission of Uplink Radio-over-Fiber Signal

Automatic Power Optimization of a 44 Tbit/s Real-Time Transmission System over 1900 km G.654.E Fiber and Widened C+L Erbium-Doped Fiber Amplifiers Utilizing 400 Gbit/s Transponders

High-Throughput and Long-Distance Transmission With >120 nm S-, C- and L-Band Signal in a 125μm 4-Core Fiber

1λ 10.5Tb/s CPRI-Equivalent Rate 1024-QAM Transmission via Self-Homodyne Digital-Analog Radio-over-Fiber Architecture

kW-level monolithic single-mode narrow-linewidth all-solid photonic bandgap fiber amplifier

Transmission of High-Frequency Terahertz Band Signal Beyond 300 GHz Over Metallic Hollow Core Fiber

75 GHz Millimeter-wave Radio-over-fiber Transmission of 10 Gbit/s over 50 km Equivalent Wireless Distance

Transmission of 51.2 Gb/s 16 QAM Single Carrier Signal in a MIMO Radio‐over‐fiber System at W‐band