Abstract:Bio-flyers of insects, birds, and bats are observed to have a broad range of wing-to-body mass ratio (WBMR) from 0.1% to 15%. The WBMR and wing mass distribution can lead to large inertial forces and torques in fast-flapping wings, particularly in insect flights, comparable with or even greater than aerodynamic ones, which may greatly affect the aerodynamic performance, flight stability, and control, but still remain poorly understood. Here, we address a simulation-based study of the WBMR effects on insect flapping flights with a specific focus on unraveling whether some optimal WBMR exists in balancing the flapping aerodynamics and body control in terms of body pitch oscillation and power consumption. A versatile, integrated computational model of hovering flight that couples flapping-wing-and-body aerodynamics and three degree of freedom body dynamics was employed to analyze free-flight body dynamics, flapping aerodynamics, and power cost for three typical insects of a fruit fly, a bumblebee, and a hawkmoth over a wide range of Reynolds numbers (<i>Re</i>) and WBMRs. We found that the realistic WBMRs in the three insect models can suppress the body pitch oscillation to a minimized level at a very low cost of mechanical power. We further derived a scaling law to correlate the WBMR with flapping-wing kinematics of stroke amplitude (Φ), flapping frequency (<i>f</i>), and wing length (<i>R</i>) in terms of <span class="equationTd inline-formula"><math> Φ R f 2 − 1</math></span>, which matches well with measurements and, thus, implies that the WBMR-based body pitch minimization may be a universal mechanism in hovering insects. The realistic WBMR likely offers a novel solution to resolve the trade-off between body-dynamics-based aerodynamic performance and power consumption. Our results indicate that the WBMR plays a crucial role in optimization of flapping-wing dynamics, which may be useful as novel morphological intelligence for the biomimetic design of insect- and bird-sized flapping micro-aerial vehicles.
What problem does this paper attempt to address?
This paper aims to explore the influence of the wing - body mass ratio (WBMR) on insect flapping flight, especially how to find an optimal balance point between flapping aerodynamics and body control. Specifically, the study analyzed through simulation the free - hovering flight dynamics, flapping aerodynamics and energy consumption of three typical insects (fruit flies, bumblebees and hawkmoths) under different Reynolds numbers (Re) and wing - body mass ratios (WBMR), in order to reveal whether there is an optimal wing - body mass ratio that can minimize body pitch oscillation and reduce mechanical energy consumption. In addition, the study also derived a scaling law for correlating the wing - body mass ratio with the dynamic parameters of flapping wings (such as swing amplitude \( U \), flapping frequency \( f \), and wing length \( R \)), and found that this scaling law agrees well with the actual measurement results, indicating that body pitch minimization based on the wing - body mass ratio may be a universal mechanism in hovering insects.
### Research Background
- **Wing - Body Mass Ratio (WBMR)**: The wing - body mass ratios of insects, birds and bats range from 0.1% to 15%, and usually decrease with the increase of flapping frequency because of the limited muscle power.
- **Rapid Wing Flapping**: The rapid wing flapping of insects will generate large inertial forces and torques, which may be comparable to or even greater than the aerodynamic forces and torques, thus significantly affecting the aerodynamic performance, flight stability and control.
- **Influence of Wing - Body Mass Ratio**: Although the influence of the wing - body mass ratio and wing mass distribution on the flapping flight dynamics is not fully understood, research shows that the wing - body mass ratio plays a key role in optimizing the flapping wing dynamics.
### Research Methods
- **Bio - inspired Dynamic Flight Simulator**: The study used a bio - inspired dynamic flight simulator, which can integrate real wing - body geometries, real wing - body kinematics and unsteady aerodynamics.
- **Geometry and Kinematics Models**: Three typical insects (fruit flies, bumblebees and hawkmoths) were selected for the study, and their geometry and kinematics models were constructed.
- **Free Flight Dynamics Modeling**: A nonlinear single - rigid - body dynamics (RBD) solver was used to couple flapping aerodynamics and 6 - degree - of - freedom body dynamics, and a multi - rigid - body dynamics (MRBD) solver was further developed to consider the time - varying wing inertial effects.
### Main Findings
- **Influence of Wing - Body Mass Ratio on Body Dynamics**: The study found that under the real wing - body mass ratio, the body pitch oscillation is minimized and the mechanical energy consumption is also low.
- **Optimal Wing - Body Mass Ratio**: The derived scaling law shows that there is a linear relationship between the wing - body mass ratio and the dynamic parameters of flapping wings (such as swing amplitude \( U \), flapping frequency \( f \), and wing length \( R \)), which is consistent with the actual measurement results.
- **Universal Mechanism**: Body pitch minimization based on the wing - body mass ratio may be a universal mechanism in hovering insects, which helps to optimize the flapping wing dynamics and improve flight performance and energy efficiency.
### Conclusion
The wing - body mass ratio plays a crucial role in optimizing the dynamics of insect flapping flight. The research results not only enhance the understanding of insect flight mechanisms, but also provide new ideas for bionic design, especially in the design of micro - air vehicles.