Abstract:Warm-mix asphalt (WMA), an up and coming technology in the pavement industry, permits the lowering of production and placement temperatures by 35°F to 100°F less than traditional hot-mix asphalt (HMA). The reduction in temperature provides various benefits such as decreased fuel consumption, improved compaction, extended paving seasons, longer haul distances, incorporation of greater percentages of recycled asphalt pavement (RAP), improved working conditions, and a reduction in the production of greenhouse gases. Since the late 1980s when the National Asphalt Pavement Association (NAPA) partnered with the EPA to study air emissions, which included greenhouse gases, from asphalt plants and the primary introduction of WMA in the United States in 2002, there has been increased focus placed on the environment. In addition to the above benefits, research has shown that lowering the production temperature of warm-mix asphalt can lead to a significant reduction in the production of emissions. Multiple technologies have been developed to allow asphalt mixtures to be placed at significantly lower temperatures. These technologies can be classified in many different ways either by temperature reduction, technologies that use water, technologies that use either an organic additive or wax, those that use chemical additives or surfactants. Material testing is important for WMA just as it is for HMA. The Warm Mix Technical Working Group recommends two forms of testing for WMA: laboratory testing and field testing. These tests determine moisture content, specific gravity, tensile strength ratio, compaction, temperature cracking, fatigue life, density, bond strength, smoothness, and indirect tensile strength in addition to other testing techniques. Current standards and specifications for WMA are being developed by states. The common practice presently is for WMA to meet the specifications and requirements of HMA. However, some states have already developed WMA specifications for the specific state. The Warm Mix Technical Working Group is working to determine a generic specification that may be implemented by government agencies. Best practices are critical to the production and placement of warm-mix asphalt. These practices which include reduction of moisture content in stockpiles, burner adjustment to ensure complete fuel combustion, drying of aggregate and maintaining sufficient baghouse temperatures, and changes in placement are crucial to saving energy and the reduction of emissions. Because warm-mix asphalt is a relatively new technology in the United States, research is needed. The industry, academia, and various agencies have made great strides in the area of warm-mix asphalt technology; however, additional research in mix design is crucial to the success of WMA. In addition to mix design, additional research is needed in the collection of data to determine the long-term performance of WMA specifically in the areas of rutting and moisture damage. Additional research in the area of the development of a product approval…

Developing an Environmentally Friendly Semi Warm Asphalt Pave-ment Mix Using Polymers and Nanocomposite Materials

Quantitative Evaluation on the Energy Saving and Emission Reduction Characteristics of Warm Mix Asphalt Mixtures

Mechanical Performance Of Warm-Mixed Porous Asphalt Mixture With Steel Slag And Crumb-Rubber-Sbs Modified Bitumen For Seasonal Frozen Regions

Laboratory investigation on warm mix asphalt incorporating organo-silane additive

A Comparative Review of Hot and Warm Mix Asphalt Technologies from Environmental and Economic Perspectives: Towards a Sustainable Asphalt Pavement

Enhancement of porous asphalt mixtures modified with various fibers and ethylene-vinyl acetate polymer

Mechanochemical Upcycling of Waste Polypropylene into Warm-Mix Modifier for Asphalt Pavement Incorporating Recycled Concrete Aggregates

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

Developing Sustainable Asphalt Mixtures Using High-Density Polyethylene Plastic Waste Material

Warm-mix asphalt state of the art and best practices

Performance evaluation of asphalt mixtures containing warm mix asphalt (WMA) additives and reclaimed asphalt pavement (RAP)

The influence of Multi-Layer Plastic Packaging (MPP) on the high-temperature performance of asphalt binders and mixtures using wet and dry mixing methods

Gradation Design and Parameter Determination of Warm-Mix-Agent-Modified Asphalt Mixture

Rheological Properties of High-Viscosity Modified Asphalt Containing Warm-Mix Additives

Innovative geopolymer-based cold asphalt emulsion mixture as eco-friendly material

Design of High-Modulus Asphalt Concrete for the Middle Layer of Asphalt Pavement

Warm-Mix Asphalt Containing Reclaimed Asphalt Pavement: A Case Study in Switzerland

Towards the low-energy usage of high viscosity asphalt in porous asphalt pavements: A case study of warm-mix asphalt additives

Laboratory investigation on the properties of warm mixing-recycled asphalt containing waste oil and plastics

Development of Cost-Effective High-Modulus Asphalt Concrete Mixtures Using Crumb Rubber and Local Construction Materials in Louisiana

Evaluation of cooling effect and road performance of warm mixed high viscosity porous asphalt mixture