Abstract:3D printing of continuous carbon fiber reinforced thermoplastic (CFRTP) composites is increasingly under development owing to its unparalleled flexibility of manufacturing 3D structures over traditional manufacturing processes. However, key issues, such as weak interlayer bonding, voids between beads and layers, and low volume ratio of carbon fiber, in the mainstream fuse deposition modeling (FDM) and extrusion suppress the applications of these techniques in mission‐critical applications, such as aerospace and defense. This communication reports a novel approach, inspired by laminated object manufacturing (LOM), for 3D printing of continuous CFRTPs using prepreg composite sheets. The prepreg sheets are successively cut based on the sliced CAD geometry, and then bonded layer upon layer using a CO2 laser beam and a consolidation roller system. The void content is low by computed tomography scans and interlaminar bonding strength is as high as conventional autoclave method by lap shear strength tests. The excellent interfacial bonding strength and high volume ratio of continuous carbon fiber contribute to the highest reported tensile strength (668.3 MPa) and flexural strength (591.16 MPa) to date, for all 3D printed CFRTPs. Moreover, the proposed technique also enables controlling the alignment of carbon fiber in printed layers. CFRTPs with unidirectional [0°]s, cross‐ply [0/90°]s, and [0/‐45/0/45°]s fiber reinforcement are produced and evaluated for mechanical properties. The proposed 3D printing method is broadly beneficial for industries requiring high performance and lightweight structural materials with complex geometries. A mechanism to 3D print ultrahigh strength carbon fiber reinforced polymer (CFRP) composites capable of achieving aligned continuous carbon fiber reinforcement is presented. The mechanical properties are superior to the existing 3D printed CFRP materials due to an excellent interfacial bonding and minimal void content. During this laser assisted 3D printing technique, temperature at the material interface reaches well above the matrix melting point.

Investigation on the mold‐less curing process of 3D printing continuous carbon fiber reinforced thermoset composites based on thermoplastic shells constraint

Investigation of a 3D Printing Method for Continuous Carbon Fiber-Reinforced Thermosetting Epoxy Composite

Carbon Fiber-Thermoplastic Composite 3D Printing Technology and Its Self-Monitoring

Self-monitoring Continuous Carbon Fiber Reinforced Thermoplastic Based on Dual-Material Three-Dimensional Printing Integration Process

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Parameter design of continuous carbon fiber-reinforced phenolic resin composites via in situ-curing 3D printing technology

A Novel Route to Fabricate High-Performance 3D Printed Continuous Fiber-Reinforced Thermosetting Polymer Composites

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

Fabrication of a continuous carbon fiber-reinforced phenolic resin composites via in situ-curing 3D printing technology

Integrated self-monitoring and self-healing continuous carbon fiber reinforced thermoplastic structures using dual-material three-dimensional printing technology

Mechanical Characterization and Production of Various Shapes Using Continuous Carbon Fiber-Reinforced Thermoset Resin-Based 3D Printing

An investigation of preparation of continuous carbon fiber reinforced PLA prepreg filament

Effect of process parameters on properties of 3D printed continuous fiber reinforced thermoplastic composites

Mechanical performances of continuous carbon fiber reinforced PLA composites printed in vacuum

3D Printing Technology for Short-continuous Carbon Fiber Synchronous Reinforced Thermoplastic Composites: A Comparison between Towpreg Extrusion and In Situ Impregnation Processes

Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites

A Mechanical Performance Study of Dual Cured Thermoset Resin Systems 3D-Printed with Continuous Carbon Fiber Reinforcement

3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites

Manufacturing and 3D printing of continuous carbon fiber prepreg filament

An investigation into mechanical properties of a 3D printed two-matrix continuous fiber composites with multi-cavity structure