Abstract:The oxygen (O) induced embrittlement of molybdenum (Mo) grain boundary (GB) is one of the key issues that limit the application of Mo-based alloys. The addition of carbon (C) can suppress the O-induced embrittlement. In this study, taking Σ5 (310)/[001] Mo GB as an example, we investigate the segregation of C/O into Mo GB and their influences on GB properties by using the first-principles method. It has been demonstrated that the suppressing effect of C on O-induced embrittlement should be mainly attributed to C inhibiting the O segregation in Mo GB, while the direct strengthening effect of C cannot compensate for the reduction of fracture energy induced by O. On the one hand, due to the attractive interaction between C and O, the presence of C effectively reduces the mobility of O in bulk Mo, thereby slowing down the segregation of O. On the other hand, owing to the large available volume and promoted electronic states in the GB region, the segregation of C and O in Mo GB is energetically favorable. Specifically, the interaction of C with O in Mo GB changes to be repulsive from the attraction of C-O in bulk system, suggesting that the pre-segregated C atoms inhibit the segregation of O into GB. This should be rationalized by the site-dependent segregation of O and strong electronic repulsion of C-O pair in the GB region. Consequently, the C addition can effectively reduce the O concentration in Mo GBs and thus relieve the O-induced embrittlement. Our results deepen the understanding of the impurities effects on the properties of Mo GB, and have a guiding significance on the development of advanced Mo-based materials.

Suppressing effect of carbon on oxygen-induced embrittlement in molybdenum grain boundary

First-principles Study of Oxygen Segregation and Its Effect on the Embrittlement of Molybdenum Symmetrical Tilt Grain Boundaries

Origin and Formation of Oxygen and Its Effects on Microstructure Evolution and Properties of Molybdenum

Enhanced Mechanical Performance of Fusion Zone in Laser Beam Welding Joint of Molybdenum Alloy Due to Solid Carburizing

Effects of oxygen on microstructure and evolution mechanism of body-centred-cubic molybdenum

Strengthening the grain boundary of Mo alloy via little TiC addition

Improvement in the Weldability of Molybdenum Alloy by Pre-Welding Solid Carburising

Effect Of Alloying Additions On The Hydrogen-Induced Grain Boundary Embrittlement In Iron

Effect of Mo on the coherent interface features of γ′-phase strengthened Co-based superalloys

First-principles Study on the Effects of Co-Segregation of Ti, B and O on the Cohesion of the Α-Fe Grain Boundary

Effect of Molybdenum on the Impact Toughness of Heat-Affected Zone in High-Strength Low-Alloy Steel

The trapping effect of transitional metals on oxygen in Mo from first-principles calculations

Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and reassessment of the maximum carbon limit.

Effects of Alloying Elements on the Solution and Diffusion of Oxygen at Iron Grain Boundary Investigated by First-Principles Study

Effect of grain boundary character on isothermal phase transformation and mechanical properties of Co-Cr-Mo alloy fabricated by selective laser melting

First-principles investigation of the Mg, Cu segregation at Al Σ5 (310) and Σ9 (221) symmetrical tilt grain boundaries

The Effect of Cr Addition on the Strength and High Temperature Oxidation Resistance of Y2O3 Dispersion Strengthened Mo Composites

Segregation Of Interstitial Light Elements At Grain Boundaries In Molybdenum

Unveiling the Mo effect on the microstructural stability of L1 2 -strengthened chemically complex alloys

Effect of Molybdenum on Electrochemical Properties of Bulk Metallic Glass Fe_(71.2-x)C_(7.0)Si_(3.3)B_(5.5)P_(8.7)Cr_(2.3)Al_(2.0)Mo_x

Effect of Molybdenum Addition on Mechanical Properties of Oriented Bulk Fe2B Crystal