Abstract:The use of Holographic Optical Elements (HOEs) in applications, such as in light shaping and redirection, requires certain characteristics such as a high Diffraction Efficiency, low angular selectivity and stability against UV damage. In order to maximize the performance of the HOEs, photosensitive materials are needed that have been optimised for the characteristics that are of particular importance in that application. At the core of the performance of these devices is the refractive index modulation created during holographic recording. Typically, a higher refractive index modulation will enable greater light Diffraction Efficiency and also operation with thinner devices, which in turn decreases the angular selectivity and the stability of the refractive index modulation introduced during recording, which is key to the longevity of the device. Solar concentrators based on volume HOEs can particularly benefit from thinner devices, because, for a solar concentrator to have a high angular working range, thinner photopolymer layers with a smaller angular selectivity are required. This paper presents an optimisation of an acrylamide-based photopolymer formulation for an improved refractive index modulation and recording speed. This was achieved by studying the effect of the concentration of acrylamide and the influence of different initiators in the photopolymer composition on the diffraction efficiency of holographic gratings. Two initiators of different molecular weights were compared: triethanolamine (TEA) and methyldiethanolamine (MDEA). A fivefold increase in the rate of grating formation was achieved through the modification of the acrylamide concentration alone, and it was also found that holograms recorded with MDEA as the initiator performed the best and recorded up to 25% faster than a TEA-based photopolymer. Finally, tests were carried out on the stability of the protected and unprotected photopolymer layers when subjected to UV light. The properties exhibited by this photopolymer composition make it a promising material for the production of optical elements and suitable for use in applications requiring prolonged exposure to UV light when protected by a thin melinex cover.

Holographic Grating Enhancement of TI/PMMA Polymers in the Dark Diffusion Process

Theoretical and experimental investigations of photo-sensitivity and polarization-sensitivity in TI/PMMA polymers

Holographic stability and storage capacity on bulk green-light sensitive TI/PMMA materials

Holographic Grating Formation in Cationic Photopolymers with Dark Reaction

The Diffraction Efficiency of Acrylate-Based Holographically Photopolymerized Gratings Enhanced by the Dark Reaction

Polarization holographic characteristics of TI/PMMA polymers by linearly polarized exposure

Theoretical and Experimental Investigations of Diffraction Characteristics Influenced by Holographic Reciprocity Effect in PQ/PMMA Polymers

Dynamic Characterizations of High Diffraction Efficiency in Volume Bragg Grating Formed by Holographic Photopolymerization

Self-focusing 3D lithography with varying refractive index polyethylene glycol diacrylate

Diffusion kinetics investigations of Nano Ag-doped holographic polymer dispersed liquid crystal gratings

Improving performance of two‐stage photopolymers for volume holographic recording by fluorinated epoxy‐amine cross‐linked matrices

Analytical Rates Determinations And Simulations On Diffusion And Reaction Processes In Holographic Photopolymerization

Effect of Recording Time on Grating Formation and Enhancement in an Amphiphilic Diblock Liquid-Crystalline Copolymer

Holographic Grating Formation in Dry Photopolymer Film with Shrinkage

High-density holographic recording parameters under different wavelength of a two dyes-sensitized photopolymer

Holographic Grating Formation in Photochromic Diarylethene-Doped Polymeric Thin Films

An Improved Multi-Exposure Approach for High Quality Holographic Femtosecond Laser Patterning

Two-Photon Polymerization of Gratings by Interference of A Femtosecond Laser Pulse

Tuning the optical properties of polydimethylsiloxane films and fabricating elastic volume Bragg diffraction gratings by picosecond ultraviolet Laser-induced photochemical reactions

Effect of Photo-Sensitizer and Thermo-Initiator Concentrations on Holographic Recording Performance of PQ/PMMA Photopolymer

Study of the Effect of Methyldiethanolamine Initiator on the Recording Properties of Acrylamide Based Photopolymer