Abstract:A viable green energy source for heavy industries and transportation is hydrogen. The internal combustion engine (ICE), when powered by hydrogen, offers an economical and adaptable way to quickly decarbonize the transportation industry. In general, two techniques are used to inject hydrogen into the ICE combustion chamber: port injection and direct injection. The present work examined direct injection technology, highlighting the need to understand and manage hydrogen mixing within an ICE's combustion chamber. Before combusting hydrogen, it is critical to study its propagation and mixture behavior just immediately before burning. For this purpose, the DI-CHG.2 direct injector model by BorgWarner was used. This injector operated at 35 barG and 20 barG as maximum and minimum upstream pressures, respectively; a 5.8 g/s flow rate; and a maximum tip nozzle temperature of 250 °C. Experiments were performed using a high-pressure and high-temperature visualization vessel available at our facility. The combustion mixture prior to burning (spray) was visually controlled by the single-pass high-speed Schlieren technique. Images were used to study the spray penetration (S) and spray volume (V). Several parameters were considered to perform the experiments, such as the injection pressure (Pinj), chamber temperature (Tch), and the injection energizing time (Tinj). With pressure ratio and injection time being the parameters commonly used in jet characterization, the addition of temperature formed a more comprehensive group of parameters that should generally aid in the characterization of this type of gas jets as well as the understanding of the combined effect of the rate of injection on the overall outcome. It was observed that the increase in injection pressure (Pinj) increased the spray penetration depth and its calculated volume, as well as the amount of mass injected inside the chamber according to the ROI results; furthermore, it was also observed that with a pressure difference of 20 bar (the minimum required for the proper functioning of the injector used), cyclic variability increased. The variation in temperature inside the chamber had less of an impact on the spray shape and its penetration; instead, it determined the velocity at which the spray reached its maximum length. In addition, the injection energizing time had no effect on the spray penetration.

Water injection strategies to control gas temperatures in hydrogen–air internal combustion engines

Exploring the Benefits of Hydrogen-Water Injection Technology in Internal Combustion Engines: A Rigorous Experimental Study

The Effect of Water Injection on a Naturally Aspirated Spark-Ignited Engine

Effect of Water Injection on Combustion and Emissions Parameters of SI Engine Fuelled by Hydrogen–Natural Gas Blends

Experimental research of direct water injection characteristics over wide range of injection temperature and ambient pressure

Experimental investigation of water injection and spark timing effects on combustion and emissions of a hybrid hydrogen-gasoline engine

An insight into direct water injection applied on the hydrogen-enriched rotary engine

Investigation of water spray evolution process of port water injection and its effect on engine performance

Effect of direct water injection on combustion and emissions characteristics of marine diesel engines

Quantitative Analysis of Water Injection Mass and Timing Effects on Oxy-Fuel Combustion Characteristics in a GDI Engine Fuelled with E10

Applications of Oxyhydrogen, Direct Water Injection, and Early-Intake Valve Closure Technologies on a Petrol Spark Ignition Engine—A Path towards Zero-Emission Hydrogen Internal Combustion Engines

Experimental and numerical investigation of combustion, performance and emission characteristics of a GDI engine using hydrogen-water complementary regulation

Effect of port water injection on the characteristics of combustion and emissions in a spark ignition direct injection engine

Determining water mass flow control strategies for a turbocharged SI engine using a two-stage calculation method

Research and Development of Self-Contained Water Injection Systems

Effect of water injection into the intake manifold on combustion and NO x emissions of CHP engine fuelled with natural gas

Spray Characterization of Direct Hydrogen Injection as a Green Fuel with Lower Emissions

Effects of direct water injection timings on knock suppression, combustion, and emission performance of high compression ratio hydrogen-enriched natural gas engine

Experimental Study on the Impact of Hydrogen Injection Strategy on Combustion Performance in Internal Combustion Engines

A study on supercritical water injection as waste heat recovery system in internal combustion engines

Impact of hydrogen direct injection on engine combustion and emissions in a GDI engine