Abstract:Ethanol is usually combined with gasoline to manufacture ethanol–gasoline with excellent combustion characteristics. However, extracting water from hydrous ethanol to manufacture anhydrous ethanol consumed much energy, which increases the production cost of ethanol–gasoline. Many researchers have studied the combustion and emissions of hydrous ethanol–gasoline to explore the application of hydrous ethanol–gasoline as the fuel for spark-ignition engines. Most previous studies changed the hydrous ethanol ratio with fixed purity in hydrous ethanol–gasoline to study the effects of hydrous ethanol. Different from previous studies, this paper studied the effects of water ratio (Wr) in hydrous ethanol on the combustion and emissions of a hydrous ethanol/gasoline combined injection engine under different excess air ratio (λ) values. The ratios of ethanol and gasoline keep constant, while the purity of hydrous ethanol changes during the research. The experiment adopted the combined injection mode with hydrous ethanol direct injection plus gasoline port injection; the direct injection ratio was 20%. The experiment set three λ (0.9, 1, and 1.2) and five Wrs (0, 5, 10, 15, and 20%). The test engine's speed was 1500 rpm, and the intake manifold absolute pressure was 48 kPa. Results showed that water inhibited combustion, prolonged CA 0-10 and CA 10-90, reduced Pmax and Tmax, and delayed APmax; larger λ made the deterioration on combustion more obvious, and the smaller λ had a larger tolerance to water. Water could increase torque and improve emissions, but different parameters corresponded to different optimal Wrs. For torque, the optimal Wr was 5%. For HC emissions, the optimal Wr was 0%; for CO emissions, the optimal value was 5%; and for NOx emissions, the best value was 20%. The best Wr was 10% for particle number (PN) emissions. Under the optimal Wr condition, when λ values were 0.9, 1, and 1.2, compared with pure gasoline, the torque increased by 7.5, 5.54, and 5.31%; HC emissions decreased by 21.37, 23.43, and 26.58%; NOx emissions decreased by 4.26, 11.47, and 12.55%; CO emissions decreased by 17.51, 34.56, −50%; and the total PN emissions decreased by 87.64, 89.64, and 76.07%.This article has not yet been cited by other publications.

Quantitative Analysis of Water Injection Mass and Timing Effects on Oxy-Fuel Combustion Characteristics in a GDI Engine Fuelled with E10

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Effect of ethanol content, water injection, and compression ratio on combustion and detailed emissions in an SI-GDI engine

Experimental and numerical investigation of combustion, performance and emission characteristics of a GDI engine using hydrogen-water complementary regulation

The Effect of Water Injection on a Naturally Aspirated Spark-Ignited Engine

A Methodology for Regulating Fuel Stratification and Improving Fuel Economy of GCI Mode Via Double Main-Injection Strategy

Effect of direct water injection on combustion and emissions characteristics of marine diesel engines

Effects of direct water injection timings on knock suppression, combustion, and emission performance of high compression ratio hydrogen-enriched natural gas engine

Effects of coupling port water injection and EGR on the spray water evolution, combustion and emission of a premixed stoichiometric natural gas engine: A numerical study

Experimental and cfd analysis of the influence of fuel injection timing on the behavior of a gasohol-based gdi engine

The Impact of Fuel and Injection Strategy on Combustion Characteristics, Emissions and Efficiency in Gasoline Compression Ignition Operation

Effect of Water Injection on Combustion and Emissions Parameters of SI Engine Fuelled by Hydrogen–Natural Gas Blends

Experimental Study the Effect of Injection Strategies on Combustion and Emission Characteristics in Gasoline Compression Ignition Engines Using Gasoline/hydrogenated Catalytic Biodiesel Blends

Numerical Investigations of Injection Timing Effects on a Gasoline Direct Injection Engine Performance: Part A, In-Cylinder Combustion Process

Comparative study on combustion and emission of ternary-fuel combined supply SI engine with oxyhydrogen/ethanol/gasoline by different injection modes of fuel

Effects of injection strategies coupled with gasoline-hydrogenated catalytic biodiesel blends on combustion and emission characteristics in GCI engine under low loads

Effects of Water Ratio in Hydrous Ethanol on the Combustion and Emissions of a Hydrous Ethanol/Gasoline Combined Injection Engine under Different Excess Air Ratios

Investigation of water spray evolution process of port water injection and its effect on engine performance

Experimental Studies on the Co-Effects of Engine Operating Parameters and Fuel Functional Groups on the Performance and Emissions of a GDI Engine

Experimental investigation of water injection and spark timing effects on combustion and emissions of a hybrid hydrogen-gasoline engine