Surface modification of 5CrNiMo steel using scanning electron beam assisted by ultrasonic vibration

Qimao Qin,Rong Wang,Deqiang Wei,Kai Wang,Huan Zhao,Jing Zhang,Hailing Yan

DOI: https://doi.org/10.1016/j.mtcomm.2023.106497

IF: 3.8

2023-06-23

Materials Today Communications

Abstract:The surface modification of 5CrNiMo steel was accomplished in this work using scanning electron beam technology assisted by ultrasonic vibration (UV). Investigations were conducted into how ultrasonic vibration affected the re-melting layer's microstructure and mechanical properties. Following the application of ultrasonic vibration, the proportion of equiaxed grain in the re-melting layer increased, and the average grain size was 6.04 μm, which was roughly 23.5% smaller than that of 7.9 μm without UV. The specimen's surface micro-hardness was 776 HV, which was roughly 16.7% higher than that of 665 HV without UV. According to the findings, the surface hardness of 5CrNiMo steel may be greatly increased by using the scanning electron beam technology with ultrasonic vibration as a supplementary force.

materials science, multidisciplinary