Abstract:Persistent cracking and progressive damage can weaken the operational performance of structures such as bridges, dams, and concrete buildings. Consequently, research into automated, high-precision crack detection methods remains pivotal within the realm of structural health monitoring (SHM). Presently, scholars predominantly rely on two-dimensional (2D) image-based algorithms for crack detection. However, these methods commonly struggle to accurately locate the three-dimensional (3D) coordinates of cracks on large structures and to extract the 3D contours of cracks. To address this challenge, this study proposes an automated 3D crack detection system for structures based on high-precision Light Detection and Ranging (LiDAR) and camera fusion. Firstly, precise registration of images and LiDAR point clouds was achieved through accurate extrinsic calibration of the sensors. Secondly, the lightweight MobileNetV2_DeepLabV3 crack semantic segmentation network was employed to detect and locate cracks. Finally, by automatically guiding the robotic arm, an industry-standard depth camera was able to capture high-precision 3D information about the crack at close observation points. Compared with the existing studies, this study emphasizes the extraction of high-precision 3D crack features and verifies the validity of the method by comparing the measurement results with those of the traditional method, demonstrating a remarkable measurement accuracy reaching sub-millimeter levels (0.1 mm). Moreover, the study introduces a comprehensive hardware platform and algorithmic framework, offering pioneering theoretical methodologies and replicable equipment references for automated surveillance and monitoring systems dedicated to structural health.

An implantable module device for crack imaging using concrete-adapted time reversal imaging algorithm

Crack Detection and Quantification for Concrete Structures Using UAV and Transformer

A Three-Step Computer Vision-Based Framework for Concrete Crack Detection and Dimensions Identification

Time Reverse Modeling of Damage Detection in Underwater Concrete Beams Using Piezoelectric Intelligent Modules

Implantable sensing technology for civil engineering structures

Multi-crack Imaging Using Nonclassical Nonlinear Acoustic Method

3D Digital Analysis of Cracking Behaviors of Rocks through 3D Reconstruction Model under Triaxial Compression

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

A Cross-Scanning Crack Damage Quantitative Monitoring and Imaging Method

Imaging of vertical surface-breaking cracks in concrete members using ultrasonic shear wave tomography

Capturing the cracking characteristics of concrete lining during prototype tests of a special-shaped tunnel using 3D DIC photogrammetry

Concrete Crack Identification and Image Mosaic Based on Image Processing

3D vision technologies for a self-developed structural external crack damage recognition robot

Time reversal damage localization in concrete based on two-dimensional meso-scale modeling

Imaging of Closed Cracks by Water-Coupled Sensor Array Based on Nonlinear Lamb Waves

Concrete Crack Assessment Using Digital Image Processing and 3D Scene Reconstruction

Investigation of the Crack Behavior of CRC Using 4D Computed Tomography, Photogrammetry, and Fiber Optic Sensing

Extraction and Measurement of Recessive and Conventional Cracks in Underground Engineering Concrete Structures

Time Reverse Modeling of Acoustic Waves for Enhanced Mapping of Cracking Sound Events in Textile Reinforced Concrete

Quantitative Surface Crack Evaluation Based on Eddy Current Pulsed Thermography

Quantitative non-destructive evaluation of CFRP delamination defect using laser induced chirp-pulsed radar photothermal tomography