Abstract:Ethylenediamine-doped (EDA-doped) polyaniline (PANI) films were deposited via spin coating technique on a glass substrate. The samples were annealed at different times and temperatures. The characterizations of the prepared PANI films were described by X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FT-IR). It is found that the conductivity changes under deep mouth exhaling for 150/1 h sample is 1.65 times faster than the films annealed at 100°C/4 h. The response and recovery time of the 150/1 h EDA-doped PANI film is decreased by order of 0.63 and 1.29 s than those films dried at 100°C for 4 h, respectively. The 150/1 h EDA doped PANI film during deep exhaling its conductivity increased abruptly from 2.2 × 10 –7 to 0.026 S/cm –1 . In a few seconds, following an inhalation, there occurs a complete transition to the dry state conductivity. Furthermore, the increment in conductivity of the EDA-doped PANI films was determined at various RH levels (20, 40, 60, 80, and 90%) with exposure and evacuation of the humid air. The doped PANI sample annealed at 150°C for 1 h exhibit the highest conductivity at 90% RH. The conductivity was increased from 2.16 × 10 –7 S/cm for the insulating state at the dry state to 0.23 S/cm for the semiconducting state at 90% RH. Consequently, the 150/1 h sample showed an increase in conductivity by order of 10 6 at 90% RH. For all samples, the conductivity progressively rises as the RH value increases till 90% of RH value samples exhibit an abrupt increase in conductivity except the 100°C/4 h sample. The highest conductivity is 0.041 S/cm at 90% RH obtained for the case of 150/30 min sample, whereas the 150/1 min and 100/4 h films show maximum conductivity of 0.027 and 0.007, respectively.

Augmentation of room temperature gas sensing properties of PANI thin films by 100 keV Ar + ion irradiation

Vertically aligned PANI nanorod arrays grown on graphene oxide nanosheets for a high-performance NH3 gas sensor

Highly Stable Polyaniline-Poly(sodium 4-Styrenesulfonate) Nanoparticles for Sensing of Amines.

Polyaniline as a Gas-Sensor Material

Gas Sensing Properties of A Composite Composed of Electrospun Poly(Methyl Methacrylate) Nanofibers and in Situ Polymerized Polyaniline

Gas sensing properties of layer-by-layer self-assembled ultrathin film of polyaniline/titanium dioxide

Synthesis of different inorganic acids doped polyaniline materials and behavior of enhancing NH3 gas sensing properties

Investigating ion irradiation effects for modifying optical properties of CA/PANI films

Composites of Fe2O3 Nanosheets with Polyaniline: Preparation, Gas Sensing Properties and Sensing Mechanism

Amino acids doped PANI sensitive materials for ammonia gas sensors operated at room temperature

Irradiation Effect in Thermoelectric Polymer Polyaniline Induced by High-Energy Electron Beam

PANI@Ag nanocomposites gas sensors for rapid detection of ammonia

The effect of different protonic acid doping on the sensitivity of polyaniline to ammonia gas

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

Impacts of Low Energy Argon Beam on Enhancing the Surface Wettability and Electrical Performance of CA/PANI Films

Investigation of Insulator-to-Semiconductor Fast Transition in Sheet-Like Polyaniline Films

Water-soluble polyaniline and its composite with poly(vinyl alcohol) for humidity sensing

Fabrication and Characterization of Polyaniline-Based Gas Sensor by Ultra-Thin Film Technology

Photothermal Sterilization Performance Of Fe3+ Doped Polyaniline Coating

Versatile Gas Sensing at Room Temperature: Facile Fabrication of a PANI-PB-ZnO Hybrid Nanocomposite for Detecting Ammonia, Acetone, and Ethanol

A comparative study between PANI, PANI/PbS and PANI/PbS/ZnO core/shell quantum dots as chemiresistive sensor for the detection of formaldehyde gas