Abstract:Thin-walled structures are widely used as crucial structural components for energy absorbing applications. To design lightweight thin-walled-involved composite structures with better mechanical performance remains an open issue. In this study, the X-shaped rib-reinforced foam-filled tubes were designed and tested under quasi-static axial compression. Two types of foams, i.e., the aluminum foam and the additively manufactured polylactide (PLA) foam were considered as lightweight fillers. The effects of foam block filling ratio (rib angle) and arrangement of different foam fillers on the axial crushing performance of the diagonally rib-reinforced foam block-filled tube were analyzed. Results indicated that tubes that were diagonally filled with PLA foam blocks possessed better energy absorption capacity, whereas the higher mean crushing strength was achieved by diagonally filling with two aluminum blocks. It also revealed that tubes filled with different foam blocks did not always show advantages over those filled with the same foams. Moreover, the diagonally aluminum foam blocks filled tubes with a large rib angle could induce the global buckling, whereas that with the rib angle of 120 degrees exhibited better mechanical properties in load consistency and specific energy absorption capacity. Numerical simulations were conducted to reveal the energy absorption enhancement mechanism of the tubes filled with varying combinations of the reinforced fillers. Results indicated that the interaction between the foam blocks and the reinforced rib contributed most to the increased energy absorption. Further, an analytical model for evaluating the crushing strength of the developed structure was proposed. The theoretical predictions are in good agreement with the experimental results. The idea of tailoring the fillers arrangement and assembling pattern would promote the development of optimal energy-absorbing thin-walled involved composite structures.

A novel design of an I-shape self-locked thin-walled system with mortise and tenon joints

Design, simulation and experiment study of a snap-fit spatial self-locking system for energy absorption

Performance‐based Plastic Design and Collapse Assessment of Diagrid Structure Fused with Shear Link

Research on energy absorption characteristics of biconical snap-fit spatial self-locking thin-walled structure

A concave-convex design strategy for periodic self-locked energy-absorbing systems

A novel self-locked energy absorbing system

Lateral crushing behavior of novel carbon fiber/epoxy composite bidirectional self-locked thin-walled tubular structure and system

Stability Design of Multi-Celled Corrugated-Plate CFST Walls under Combined Axial and In-Plane Bending Loads

Global Buckling Design of Multi-Celled CFST Walls with Four Simply-Supported Edges

Axial crushing of self-lock multi-cell tubes with foam filler and tube envelope

A multi-bionic design strategy for modular energy absorption system based on interlocking suture integrated with Bouligand-like arranged perforations

A Flexible, Reusable and Adjustable High-Performance Energy Absorption System Inspired by Interlocking Suture Structures

An on-demand tunable energy absorption system to resolve multi-directional impacts

Crashworthiness design and enhanced energy absorption of multi-cell thin-walled circular tubes

Axial mechanical properties and robust optimization of foam-filled hierarchical structures

Crushing behavior and energy absorption of node self-locked Kagome honeycomb

Design Method for Local Buckling Resistance of Double Steel Plate–Concrete Composite Walls with Stiffening Ribs and Tie Plates

A comparative study on dynamic compression response of multi-cell thin-walled structures with filling foams and connecting ribs

Foam-filling Techniques to Enhance Mechanical Behaviors of Woven Lattice Truss Sandwich Panels

OUT-OF-PLANE BEHAVIOUR OF UNREINFORCED MASONRY WALLS WITH TOPOLOGICAL INTERLOCKING BRICK

Energy-absorbing mechanism and crashworthiness performance of thin-walled tubes diagonally filled with rib-reinforced foam blocks under axial crushing