Abstract:Precious metal catalysts with superior low-temperature activity and excellent thermal stability are highly needed in environmental catalysis field. In this work, a novel two-step incipient wetness impregnation (T-IWI) method was developed for the fabrication of a unique and highly stable CeO2/Al2O3 support (CA-T). Pd anchored on CA-T exhibited a much higher low-temperature catalytic activity and superior thermal stability in carbon monoxide (CO) and hydrocarbon (HC) oxidations, compared to Pd anchored on conventional CeO2/Al2O3 (CA), which was prepared by a one-step IWI method. After aging treatment at 800 °C, the CO oxidation rate on Pd/CA-T (1.69 mmol/(gPd s)) at 120 °C was 4.1 and 84.5 times of those on Pd/CA (0.41 mmol/(gPd s)) and Pd/Al2O3 (0.02 mmol/(gPd s)), respectively. It was revealed that the CA-T support with well-controlled small CeO2 particles (ca. 12 nm) possessed abundant defects for Pd anchoring, which created rich Pd-CeO2 interfaces with strengthened interaction between Pd and CeO2 where oxygen could be efficiently activated. This resulted in the significantly improved oxidation activity and thermal stability of Pd/CA-T catalysts. The T-IWI method developed herein can be applied as a universal approach to prepare highly stable metal oxide-alumina-based supports, which have broad application in environmental catalyst design, especially for automobile exhaust aftertreatment.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.1c00077?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.1c00077</a>.Catalyst characterization details, BET surface areas, CeO2 crystallite sizes, activity data, EXAFS fitting parameters, surface elemental compositions, XRD patterns, HAADF-STEM images, water contact angles, pore size distributions, XANES, Ce 3d and Pd 3d XPS, CO-TPR profiles, in situ DRIFTS, and OSC values (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.1c00077/suppl_file/es1c00077_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhancing Activity and Stability of Pd-on-TiO 2 Single-Atom Catalyst for Low-Temperature CO Oxidation through in Situ Local Environment Tailoring

Optimizing Alkyne Hydrogenation Performance of Pd on Carbon in Situ Decorated with Oxygen-Deficient TiO2 by Integrating the Reaction and Diffusion

Crystal Facet Induced Single-Atom Pd/CoxOyon a Tunable Metal-Support Interface for Low Temperature Catalytic Oxidation

Self-assembly of a Highly Stable and Active Co3O4/H-TiO2 Bulk Heterojunction with High-Energy Interfacial Structures for Low Temperature CO Catalytic Oxidation

Tailoring the Local Environment of Platinum in Single-Atom Pt1 /CeO2 Catalysts for Robust Low-Temperature CO Oxidation

In-situ Formed Stable Pt Nanoclusters on Ceria-Zirconia Solid Solutions Induced by Hydrothermal Aging for Efficient Low-Temperature CO Oxidation

A Hydrothermally Stable Single-Atom Catalyst of Pt Supported on High-Entropy Oxide/Al 2 O 3 : Structural Optimization and Enhanced Catalytic Activity

Constructing an oxygen vacancy- and hydroxyl-rich TiO2-supported Pd catalyst with improved Pd dispersion and catalytic stability

Photothermal Catalyst Engineering: Hydrogenation of Gaseous CO2 with High Activity and Tailored Selectivity

Atomic Layer Deposition on Pd Nanocrystals for Forming Pd-TiO 2 Interface Toward Enhanced CO Oxidation

Structure-activity relationship of Pt catalyst on engineered ceria-alumina support for CO oxidation

Activation of Pt Nanoclusters on TiO2 via Tuning the Metallic Sites to Promote Low-Temperature CO Oxidation

Highly Active and Stable Palladium Catalysts on Novel Ceria–Alumina Supports for Efficient Oxidation of Carbon Monoxide and Hydrocarbons

Thermally stable single atom Pt/m-Al2O3 for selective hydrogenation and CO oxidation

Single-atom Catalysis of CO Oxidation Using Pt1 FeOx

Low‐Temperature CO Oxidation over the Pt−TiN Interfacial Dual Sites

Remarkable Enhancement of CO Oxidation over Pt1/CeO2 Catalysts by Atomically Dispersed Tungsten

A Vicinal Effect for Promoting Catalysis of Pd1/TiO2: Supports of Atomically Dispersed Catalysts Play More Roles Than Simply Serving As Ligands.

Activation of Surface Lattice Oxygen in Single-Atom Pt/CeO2 for Low-Temperature CO Oxidation.

Hydrogen-controlled structural reconstruction of palladium-bismuth oxide cluster to single atom alloy for low-temperature CO Oxidation

Palladium Encapsulated by an Oxygen‐Saturated TiO2 Overlayer for Low‐Temperature SO2‐Tolerant Catalysis During CO Oxidation