Abstract:Purpose Prior to manufacturing, designing plays a vital role in the selection of materials and other design parameters. Therefore, during the deposition of materials, substrate materials provide support and affect the microstructure of the deposits, which may not be desirable in the manufactured product. Hence, the main purpose of the study is to analyse the behaviour of the microstructure at the interface of deposited material and substrate. Design/methodology/approach In this study, two blocks of Inconel 625 (IN625) and Stainless steel 304L (SS304L) metal powders were deposited on an SS304L substrate using laser directed energy deposition (DED) technique. Deposited blocks comprised 50% IN625 + 50% SS304L or 100% IN625. After deposition, microstructural behaviour at the interface of the deposits and substrates was analysed using different tests such as optical microscopy (OM), microhardness testing, X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). An improvement in microstructure was proposed by performing heat treatment of the deposited sample. Findings Formation of martensite and precipitates at the interface of the deposit and substrate was observed. Formation of martensite and precipitates such as α, carbide and δ phases were observed in OM and SEM images. Due to the formation of these phases, interface regions showed a peak in the hardness graphs. Post-heat treatment of the samples was one of the solutions to resolve these issues. Originality/value This paper suggests the formation of a heat-affected zone (HAZ) at the interface of the deposit and substrate, which may negatively affect the overall utility of the deposited part. The properties of the HAZ were investigated. To suppress these detrimental effects, post-heat treatment of the deposited sample was performed, and the samples were further analysed. The post-heat-treated samples exhibited as reduction in HAZ thickness and had more uniform hardness throughout the cross-section compared with the untreated samples.

Interface Hardness Analysis of between IN625 and CoCrMo Manufactured by Pulsed Wave Laser Powder Bed Fusion

Microstructure, Compressive Performance and Wear Resistance of Pure Molybdenum Additively Manufactured Via Laser Powder Bed Fusion

Interface Analysis between Inconel 625 and Cobalt-Chromium Alloy Fabricated by Powder Bed Fusion Using Pulsed Wave Laser

Characterization of Ductile Nano-Tic Dispersed V4Cr4Ti/RAFMs Solid Diffusion Joint for Nuclear Fusion Reactor Application

Mechanical Properties and Interfacial Characterization of Additive-Manufactured CuZrCr/CoCrMo Multi-Metals Fabricated by Powder Bed Fusion Using Pulsed Wave Laser

Interface Behaviors and Mechanical Properties of Diffusion Bonded 45 Steel/additive Manufactured 316L Steel Joints

Microhardness and Tensile Strength Analysis of SS316L/CuCrZr Interface by Laser Powder Bed Fusion

Design for Manufacturing of Cemented Carbide Coated Components Toward High Wear and Impact Resistance Performance

Effect of Co-content on microstructure, phases, and mechanical properties of laser additive manufactured Co x (CrNi) 100-x alloy

Comparison of properties at the interface of deposited IN625 and mixture of IN625 SS304L by laser directed energy deposition and SS304L substrate

Microstructure and Mechanical Properties of Additive Manufactured AISI 410/CoCrFeNiMo High-Entropy Alloy Dissimilar Alloys via Combining Wire-Arc Directed Energy Deposition and Selective Laser Melting Approach

In Situ Alloyed Medium Entropy Alloy Fabricated by Laser Powder Bed Fusion: Microstructure and Cryogenic Performance

Influence of Cr/Mo ratio on microstructure and mechanical properties of the Ni-based superalloys fabricated by laser additive manufacturing

Investigation of Impact Strength, Micro Hardness and Metallurgical Analysis of DMLS Fabricated CoCrMo Alloy Samples

Aluminum Chromium Nitride Coating on a Laser Shock Micro-Molded Surface of E690 High-Strength Steel and Its Antifriction Mechanism

Laser deposition of refractory MO- NI alloys

A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy

Investigations on laser-assisted turning of IN625 alloy with hot hardness approach using uncoated and CrAlSiN coated WC tools

A Study of the Microstructure and Mechanical and Electrochemical Properties of CoCrFeNi High-Entropy Alloys Additive-Manufactured Using Laser Metal Deposition

Microstructure and high-temperature wear behaviour of Inconel 625 multi-layer cladding prepared on H13 mould steel by a hybrid additive manufacturing method

Microstructure and thermal properties of dissimilar M300–CuCr1Zr alloys by multi-material laser-based powder bed fusion