Abstract:Rationale: Chlorinated aromatics and alkanes are widely used for their flame retardancy, but they need to be monitored when used in recycled pulp. This paper reports the use of palladium acetate/activated carbon (Pa/Ac) activated by nitric acid as an online catalyst to determine chlorinated aromatics and chlorinated alkanes in recycled paper products using gas chromatography-tandem mass spectrometry (GC-MS/MS), which significantly improves the sensitivity of the method and remarkably lowers the detection limits. Methods: The Pa/Ac catalyst was prepared using a self-made catalytic device and used as key to the online catalytic conversion of target chlorinated aromatic hydrocarbons and chlorinated alkanes for GC-MS/MS analysis. The response surface model was used to optimize catalytic conditions. Then GC-MS/MS in the multireaction monitoring mode with online catalysis was applied for the analysis of polychlorinated biphenyls, polychlorinated terphenyls, polychlorinated naphthalene, and chlorinated paraffins (CP) in recycled paper products. Results: Compared with traditional methods, the Pa/Ac catalyst can transform chlorinated aromatic hydrocarbons into aromatic hydrocarbons through dechlorination hydrogenation, thus lowering the detection limit of the GC-MS/MS method significantly. It can transform paraffin chloride into the corresponding alkane to better distinguish short-chain, medium-chain, or long-chain CPs. Online catalytic conversion significantly improved the sensitivity and reproducibility (88.7%-113.1%) of the method. Tissue samples with various concentration levels of chlorinated aromatics and chlorinated alkanes were tested. The linearity range of the reduced target compounds in the reduction product solution was 0.02-1.00 μg/ml (R2 > 0.995). The quantitative detection limit was 0.03-0.05 μg/kg, and relative standard deviation was less than 6.9%. Conclusion: This study was the first to introduce the Pa/Ac catalytic device as an online catalytic unit in the determination of chlorinated aromatics and chlorinated alkanes using the GC-MS/MS method. The target compounds were converted into alkanes and aromatic hydrocarbons with unchanged carbon structures, and the method could achieve a low detection limit with no need for high-end methods such as GC-chemical ionization ion source (CI)-MS or high-resolution mass spectrometry. These methods are suitable for the determination of chlorine pollutants in recycled paper and its raw materials.

In situ quantitative analysis by ultrasonic extraction and nebulization combined with hydrogen flame ionization mass spectrometry: Diisopropylnaphthalene (DIPN), a marker of recycled paper in packing materials

Rapid Determination of Aldehydes in Food by High-Throughput Reactive Paper Spray Ionization Mass Spectrometry

Environmentally friendly method for the determination of acrylamide and trimethylolpropane in paper packaging materials by liquid chromatography with tandem mass spectrometry.

Ultrasound/microwave-assisted solid-liquid-solid dispersive extraction with high-performance liquid chromatography coupled to tandem mass spectrometry for the determination of neonicotinoid insecticides in Dendrobium officinale.

Quantitative analysis of Phthalate Esters by in-situ thermal desorption atmospheric pressure photoionization mass spectrometry using a dopant as the internal standard

Identification and quantification of polyethylene microplastics with sulfur-doped carbon nanoparticles in fluorescence mode and construction of paper-based analytical method

Direct Mass Spectrometric Analysis of Brominated Flame Retardants in Synthetic Polymers

Nebulization Dielectric Barrier Discharge Ionization Mass Spectrometry: Rapid and Sensitive Analysis of Acenaphthene.

Detection of trace chlorine pollutants in recycled pulp using gas chromatography-tandem mass spectrometry with response surface-optimized carbon structure online catalysis

Direct sample introduction GC-MS/MS for quantification of organic chemicals in mammalian tissues and blood extracted with polymers without clean-up

An Environmentally Friendly Method for the Determination of Pentachlorophenol in Paper Packaging Materials Using Ultrasonic-Assisted Micellar Extraction

A Needle Extraction Device Packed with Molecularly Imprinted Polymer Functionalized Fiber for the Determination of Polycyclic Aromatic Hydrocarbon in Water

Paper Spray: a Simple and Efficient Means of Analysis of Different Contaminants in Foodstuffs

Facile in-situ polymerization of polyaniline-functionalized melamine sponge preparation for mass spectrometric monitoring of perfluorooctanoic acid and perfluorooctane sulfonate from biological samples

Paper spray ionization for ambient inorganic analysis

Determination of Diphenylamine Stabilizer and Its Nitrated Derivatives in Smokeless Gunpowder Using a Tandem MS Method

Analysis of trace-level nitrated polycyclic aromatic hydrocarbons in water samples by solid-phase microextraction with GC-MS.

Quantification of nitrated-polycyclic aromatic hydrocarbons in atmospheric aerosol samples with in-injection port thermal desorption-gas chromatography/ negative chemical ionization mass spectrometry method

Determination of nitrogen-containing organic compounds in commercially available recycled cardboards intended for food contact applications

Near-infrared carbon quantum dots from PEG-based deep eutectic solvents for high-accuracy quantitative analysis of naphthenic acids in wastewater

A powerful method for In Situ and rapid detection of trace nanoplastics in water—Mie scattering