Abstract:Silicon heterojunction (SHJ) solar modules gained strong interest from solar photovoltaic (PV) module manufacturers and in the global market due to their high-efficiency potential. However, the presence of an amorphous silicon layer in SHJ structures raises concerns about their stability under light exposure. In this article, we compare the stability of SHJ modules to the stability of p-type and n-type homojunction monocrystalline silicon modules and of several thin-film PV technologies. The analysis is performed in intermediate precision conditions of measurement, where the same modules are measured indoors with the same measurement procedure, same location and equipment, and over an extended period of time, during which the modules are kept stored and not exposed to light. The results from all tested SHJ modules, which were also confirmed in reproducibility conditions, show a slow exponential degradation in the dark, which is fully recovered when the module is subsequently light-soaked. With this behavior, SHJ modules recall the metastability of certain thin-film technologies. The relevance of solar PV energy in the global electricity generation mix is at the present time unquestionable and all energy outlooks now report PV as a key player in the next decades for the transition toward a decarbonized energy system. When transferred into the manufacturing and deployment phase, the ambitious solar PV targets meet, among others, the challenge of accurate and reliable power rating of the PV modules, for which differences of a fraction of a percent mean significant investment gains or losses for the manufacturers, investors, and final users. The factors that mainly affect the uncertainty of PV power rating in the production line are the accuracy in the calibration of the reference modules and their temporal stability. Among other PV technologies, SHJ, with an efficiency that now goes beyond 22% at the module level and is expected to increase further, is the fastest gaining in market share (estimated to hit 10% by 2024 and 20% by 2032). However, the observed "metastability" (i.e., the change of the electrical performance to a status with lower or higher stable power when the module is stored in the dark for a prolonged period of time), which is discussed in this article for commercial SHJ modules, although not affecting the field performance, may impact the production capacity and should be carefully addressed by SHJ module manufacturers, researchers, and testing laboratories.

Apparent Intensity Dependence of Shunts in PV Modules Revision of the Shunt Parameterization in the De Soto Model and PVsyst

Performance Benchmark of Bypassing Techniques for Photovoltaic Modules

Shunts in crystalline silicon PV modules: A comprehensive review of investigation, characterization, and mitigation

Performance Assessment of Mismatch Mitigation Methodologies Using Field Data in Solar Photovoltaic Systems

Photovoltaic Modeling: A Comprehensive Analysis of the I–V Characteristic Curve

Modelling an Influence of Solar Cells' Connection Manner in Silicon Photovoltaic Modules on Their Characteristics with Partial Shading

Predicting unparalleled degradation progression in PV module using simulation of shunt resistance experimental data

Development of a Model to Simulate the Performance Characteristics of Crystalline Silicon Photovoltaic Modules/strings/arrays

A Robust Parametrization Method of Photovoltaic Modules for Enhancing One-Diode Model Accuracy under Varying Operating Conditions

Intrinsic-Capacitance-based Differential Power Processing for Photovoltaic Modules

In-depth analysis of photovoltaic module parameter estimation

A Simple Mismatch Mitigating Partial Power Processing Converter for Solar PV Modules

An Analytical Model for a Photovoltaic Module under Partial Shading Conditions

An Novel Explicit Model for Photovoltaic I-V Characteristic Prediction Based on Different Splitting Spectrum

On the metastability of silicon heterojunction solar photovoltaic modules

Potential-induced Degradation: Recombination Behavior, Temperature Coefficients and Mismatch Losses in Crystalline Silicon Photovoltaic Power Plant

Incidence Angle Effect: Validation of New Measurement Methods for IEC 61853‐2

Application of Electroluminescence Imaging to Distinguish Ohmic and Non Ohmic Shunting in Inaccessible Cells Within a PV Module

Impact of partial shading on the performance and reliability of potential-induced degraded crystalline silicon PV module

In-Situ Measurement of Power Loss for Crystalline Silicon Modules Undergoing Thermal Cycling and Mechanical Loading Stress Testing

Adjusting the Single-Diode Model Parameters of a Photovoltaic Module with Irradiance and Temperature