Abstract:In this study, as the plasticizer, Camellia oleifera seed-oil-based cyclohexyl ester (COSOCE) was prepared by the reaction of cyclohexene oxide and refined C. oleifera seed oil (RCOSO) obtained by acidification hydrolysis after saponification. In addition, the structure of the target product was confirmed by Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and Raman spectroscopy. COSOCE was used as plasticizer-modified polyvinyl chloride (PVC) membranes. The structure of the COSOCE-modified PVC membranes were characterized by Raman spectroscopy and scanning electron microscopy (SEM). The properties of the COSOCE-modified PVC membrane were characterized by contact angle measurements, universal testing machine, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The results revealed that (1) The COSOCE-modified PVC membranes exhibit a good microscopic morphology. Combined with energy-dispersive X-ray spectroscopy (EDS) and contact angle measurement results, the COSOCE-modified PVC membranes are confirmed to be a hydrophilic material. (2) The modified PVC membrane with 60% COSOCE exhibited the best mechanical properties. The tensile strength reached 23.56 ± 2.94 MPa. (3) COSOCE-modified PVC material exhibited better thermal stability, with a loss rate of less than 75% at the end of the first decomposition stage. Compared with that of the dioctyl-phthalate (DOP)-modified PVC membrane, the initial decomposition temperature of PVC was increased by 1.17°C–8.17°C, and the residual rate was increased by 0.67%–5.75%. The carbon–carbon double bond in the COSOCE molecular structure can remove the free radicals generated during the degradation of PVC material and slow down the decomposition rate of PVC. In addition, the double bond can be cross-linked partially with the PVC molecular chain containing the conjugated polyene structure, thereby increasing the movement resistance of the PVC molecular chain segment. Hence, COSOCE can replace DOP as a PVC plasticizer.

Synthesis of Biomass Based Plasticizer from Linoleic Acid and Cardanol for Preparing Durable PVC Material

Synthesis And Properties Of Long Chain Polyesters From Biobased 1,5-Pentanediol And Aliphatic Alpha,Omega-Diacids With 10-16 Carbon Atoms

Synthesis and application of eleostearic acid based plasticizer

Synthesis and properties of an eco-friendly bio-based plasticizer for PVC with enhanced migration resistance

Synthesis and properties of bio‐based environmental plasticizer derived from oleic acid for poly (vinyl chloride)

Plasticizing and thermal stabilizing effect of bio‐based epoxidized cardanol esters on PVC

A highly stable bio-based plasticizer constructed from renewable acids for plasticizing and enhancing the optical properties of poly(vinyl chloride)

Epoxidized isosorbide-based esters with long alkyl chains as efficient and enhanced thermal stability and migration resistance PVC plasticizers

Synthesis and Characterization of Phenyl Camellia oleifera Seed Oil Ester Plasticizing PVC

Synthesis and Properties of a Novel Levulinic Acid-Based Environmental Auxiliary Plasticizer for Poly(vinyl chloride)

Synergistic Effect of Thermal Stabilization and Plasticization of Epoxidized Cardanol Esters on PVC

Structural Modification of Waste Cooking Oil Methyl Esters As Cleaner Plasticizer to Substitute Toxic Dioctyl Phthalate

Synthesis of azelaic acid copolyester plasticizers and their application in PVC

Preparation and Performance of Bio-Based Polyol Ester from One-Pot Synthesis of Castor Oil as Nontoxic Poly(Vinyl Chloride) Plasticizer

Synthesis and evaluation of oleic acid‐derived hyperbranched polyester as an efficient plasticizer for PVC

Insights into Biobased Epoxidized Fatty Acid Isobutyl Esters from Biodiesel: Preparation and Application As Plasticizer

Highly stable and highly stretchable poly(vinyl chloride)‐based plastics prepared by adding novel green oligomeric lactate plasticizers

Biodegradable PVC plasticizer derived from a new CO2-based Poly(carbonate-ester) macrodiol: Molecular design and plasticizing effect

Preparation of Biomass-Based Ester End-Capped Hyperbranched Poly(ether)s via Facile One-Pot Reaction and Their Performance as Non-Toxic Plasticizers

Epoxidized esters of succinic acid, oleic acid and propylene glycol as an effective bioplasticizer for PVC: A study of processing conditions on the physico‐chemical properties

Plasticizing Effect of Camellia oleifera Seed-Oil-Based Plasticizer on PVC Material Modification