Abstract:Most of the plasticizers used during poly (vinyl chloride) processing are typically toxic petroleum-based phthalates. Furthermore, large amount of edible oils become waste all over the world, fortunately, waste cooking oils have the potential to be an economic alternative for synthesizing different biomaterials. This study aimed to synthesis an improved properties and cost competitiveness cleaner bio-plasticizer using waste cooking oil methyl esters as staring raw materials. In this paper, waste cooking oil methyl esters were structurally modified i.e., transesterification and epoxidation reaction, to prepare epoxide waste cooking oil 2-ethylhexyl esters. The in-situ epoxidation was mainly studied by response surface methodology, with optimum conditions: reaction time was 7 h, molar ratio of C=C bonds/FA/H2O2 was 1.00/0.35/2.41, and reaction temperature was 65.84 degrees C with a maximum relative percentage conversion to oxirane of 92%. Also, the plasticizing effectiveness of epoxide waste cooking oil 2-ethylhexyl esters to substitute toxic plasticizer dioctyl phthalate were studied. Results showed that the mechanical and thermal performance of PVC samples was significantly improved with partial substitutions, while the migration resistance was slightly decreased. Comparison with conventional epoxy compound highlighted that epoxide waste cooking oil 2-ethylhexyl esters had superior low temperature property, oxidation stability, and remarkably reduced the glass transition temperature of PVC. In conclusion, the prepared epoxide via structural modification from waste cooking oil methyl esters proved to be an effective alternative to dioctyl phthalate, replacing about 40% of the total plasticizer. This may lead to the eco-development of waste cooking oil materials, and makes the plasticizing process more environmentally friendly. (C) 2018 Elsevier Ltd. All rights reserved.

Synthesis and application of eleostearic acid based plasticizer

Synthesis of Biomass Based Plasticizer from Linoleic Acid and Cardanol for Preparing Durable PVC Material

Structural Modification of Waste Cooking Oil Methyl Esters As Cleaner Plasticizer to Substitute Toxic Dioctyl Phthalate

Plasticizing and thermal stabilizing effect of bio‐based epoxidized cardanol esters on PVC

A highly stable bio-based plasticizer constructed from renewable acids for plasticizing and enhancing the optical properties of poly(vinyl chloride)

Synthesis and properties of an eco-friendly bio-based plasticizer for PVC with enhanced migration resistance

Insights into Biobased Epoxidized Fatty Acid Isobutyl Esters from Biodiesel: Preparation and Application As Plasticizer

Novel biologically derived tartaric acid plasticizer: Synthesis and application

Synthesis and application of environmental plasticizers based on benzene polyacid ester

Synthesis of azelaic acid copolyester plasticizers and their application in PVC

Epoxidized isosorbide-based esters with long alkyl chains as efficient and enhanced thermal stability and migration resistance PVC plasticizers

Synthesis and properties of bio‐based environmental plasticizer derived from oleic acid for poly (vinyl chloride)

Synthesis and Characterization of Phenyl Camellia oleifera Seed Oil Ester Plasticizing PVC

The Effects of Epoxidized Acrylated Castor Oil (EACO) on Soft Poly (vinyl chloride) Films as a Main Plasticizer

Preparation and Performance of Bio-Based Polyol Ester from One-Pot Synthesis of Castor Oil as Nontoxic Poly(Vinyl Chloride) Plasticizer

Synergistic Effect of Thermal Stabilization and Plasticization of Epoxidized Cardanol Esters on PVC

Preparation of Biomass-Based Ester End-Capped Hyperbranched Poly(ether)s via Facile One-Pot Reaction and Their Performance as Non-Toxic Plasticizers

Synthesis and evaluation of oleic acid‐derived hyperbranched polyester as an efficient plasticizer for PVC

Synthesis and Properties of a Bio-based Plasticizer Derived from Fatty Acid Methyl Ester of Erucic Acid

Effect of benzene ring and alkane chain contained bio-based plasticizers on the plasticizing performance of polyvinyl chloride films

Waste Fatty Acid-Based Methyl Tetraglycol Ester Derived from Dimer Acid Manufacturing as an Efficient and Biodegradable Plasticizer for Poly(vinyl chloride)