Abstract:Carbon fiber reinforced polymer composites are widely used in the rehabilitation, repair, and strengthening of civil, marine, and naval infrastructure and structural systems. In these applications, they are exposed to a range of exposure conditions, including humidity and immersion, which are known to affect the durability of the resin and the fiber–matrix interface over long periods of time. This paper presents results of long-term hygrothermal aging of wet layup carbon/epoxy composites including through acceleration by temperature focusing on the development of a comprehensive understanding of moisture uptake kinetics and its effects on glass transition temperature and interface and inter-/intra-laminar dominated performance characteristics. A two-phase model for uptake that incorporates both diffusion- and relaxation-/deterioration-dominated regimes, as well as a transition regime, is shown to describe uptake well. The inclusion of damage terms to the diffusion and relaxation coefficients is seen to capture changes well, with the effective diffusion and relaxation coefficients increasing with fiber volume fraction and temperature. Effects of uptake, including at elevated temperatures, reflective of accelerated aging, on glass transition temperature and flexural strength are correlated, emphasizing a three-stage progression of overall response in line with the moisture uptake changes. The drop in glass transition temperature per percent increase in moisture uptake was seen to range from a low of 4.38% per % increase in moisture content, for the highest volume fraction at the highest temperature, to a high of 6.95% per % increase in moisture content, for the intermediate volume fraction at the lowest temperature. The composites with heavier fabric showed the greatest drop in both glass transition temperature and flexural strength, indicating a level of correlation between these characteristics as well. It is shown that both glass transition temperature and flexural strength show steep initial decreases, followed by a regime with slower decrease and, then, an asymptotic or near-asymptotic response with time of immersion, suggesting a close correlation with moisture uptake, which forms the basis for future modeling.

Deformation Rate Effect on Compression Behaviour of Glass Fiber-Epoxy Composites Under Seawater Aging

Effect of seawater aging on mechanical, buckling, structural, and thermal properties of nano Al2O3 and TiO2‐doped glass‐epoxy nanocomposites

Effect of seawater aging on impact behavior of glass fiber/epoxy laminates with drilled holes

Mechanical Properties Characterization of Glass/Carbon Fiber Hybrid Multilayer Composite under Environmental Aging Condition

Influence of accelerated aging on mechanical properties and aging behavior of glass fiber reinforced pipe

The Influence of Long Term Water Immersion Ageing on Impact Damage Behaviour and Residual Compression Strength of Glass Fibre Reinforced Polymer (Gfrp)

Hygrothermal aging effect on the water diffusion in glass fiber reinforced polymer (GFRP) composite: Experimental study and numerical simulation

Investigation of the effect of thermal aging and wear test parameters on the wear behavior of glass fiber (GF) reinforced epoxy composites

Moisture and Glass Transition Temperature Kinetics of Ambient-Cured Carbon/Epoxy Composites

Accelerated Zero-Stress Hydrothermal Aging of Dry E-Glass Fibers and Service Life Prediction Using Arrhenius Model

Experimental investigation of long-term performance of fiber-reinforced epoxy and polyurethane polymer composites

The influence of hygrothermal aging on the hoop tensile strength of glass fiber wound polymer composites fabricated via filament winding technique

The Coupling Effects of Seawater Aging and Fatigue Micro-Crack on Mechanical Degradation of Carbon Fiber/epoxy Plain Woven Composites

Hygrothermal deterioration in carbon/epoxy and glass/epoxy composite laminates aged in marine-based environment (degradation mechanism, mechanical and physicochemical properties)

Damage investigation of hybrid flax-glass/epoxy composites subjected to impact fatigue under water ageing

Effect of seawater aging on the erosive wear response of aramid fiber reinforced composites

Mechanical behavior of glass fiber‐reinforced hollow glass particles filled epoxy composites under moisture environment

Effects of corrosion depths on flexural properties of glass fiber/unsaturated polyester composites in salt spray environment

Influence of Moisture Diffusion on the Dynamic Compressive Behavior of Glass/Polyester Composite Joints for Marine Engineering Applications

Impact of Prolonged Exposure of Eleven Years to Hot Seawater on the Degradation of a Thermoset Composite

Combined Effects of Sustained Loads and Wet-Dry Cycles on Durability of Glass Fiber Reinforced Polymer Composites