Abstract:As well known, sustainability issues represented by the environment and resource protection have been paid close attention nowadays. Natural fiber has been an increasing interest and promising as reinforcing fiber in polymeric composites due to its low density, cost, acceptable specific strength and biodegradation. Even though, the principle challenge for natural fibers used as reinforcement is their internal strong water-absorption ability when the exposed in wet and water environment. Long-term hydrothermal degradation behavior of Glass reinforced composite (GFRP) and jute reinforced composite (JFRP) have been discussed in previous study on the basis of the great amount of physical and mechanical testing results. As former working reported, gained water content increases linearly against the square root of aging time followed by gradual increase trend in longer duration both in JFRP and GFRP. In particularly, JFRP’s weight loss performance occurred earlier with higher value compared to GFRP. However, water absorption and weight loss mechanism, relationship between weight change and retention of mechanical property for JFRP didn’t report and illustrate clearly and extensively. Therefore, in order to figure it out comprehensively, the current study was focus on hydrothermal ageing mechanism and corresponding degraded mechanical behavior. Firstly, 2 layers of deeply dried and natural dried jute woven fabric reinforced unsaturated polyester were fabricated by hand-layup method. The cut samples were immersed into 80°C hot water bath for predetermined durations and inspected by ultrasonic wave. Afterwards, 3-point bending test with acoustic emission (AE) measurement was carried out for aged samples. The weight change mechanism, evolution of internal deterioration and mechanical property along with ageing time was investigated. The result indicated that JFRP can absorb water easily and quickly compared with GFRP owing to jute fiber’s hydroscopic nature. Weight loss was caused as a result of resin particle loss and pectin dissolution from the developed micro-crack owing to hydrothermal water environment. What’s more, internal serious deterioration occurred after 24 hours immersion leading to larger reduction of mechanical property.

The influence of hygrothermal aging on the hoop tensile strength of glass fiber wound polymer composites fabricated via filament winding technique

Effects of Hygrothermal Aging and Cyclic Compressive Loading on the Mechanical and Electrical Properties of Conductive Composites

Comparison of the effect of thermal and hygrothermal sub-Tg aging on the durability and appearance of multilayered filament wound composite structure

Research on the Aging Effects of Adhesive and Composites on the Degradation Mechanism of Composite Adhesive Joints in Thermal-Humidity-Cycles for Automobiles

Influence of Hygrothermal Aging on the Durability and Interfacial Performance of Pultruded Glass Fiber-Reinforced Polymer Composites

Effect of hygrothermal aging on mechanical properties of continuous flax fiber composites

Hydrothermal Ageing Mechanism of Natural Fiber Reinforced Composite in Hot Water

Strength degradation of GFRP cross-ply laminates in hydrothermal conditions

Influence of accelerated aging on mechanical properties and aging behavior of glass fiber reinforced pipe

Mechanical strength and low-velocity impact behavior of glass fiber reinforced filament wound pipes with different number of layers after hydrothermal aging

Hygrothermal aging and recycling effects on mechanical and thermal properties of recyclable thermoplastic glass fiber composites

Hygrothermal Effect on GF/VE and GF/UP Composites: Durability Performance and Laboratory Assessment

An Experimental Investigation of the Mechanism of Hygrothermal Aging and Low-Velocity Impact Performance of Resin Matrix Composites

Hygrothermal aging behavior of C/GFRP hybrid rod with bundle‐by‐bundle dispersion

Effect of thermal and hydrothermal aging on the crashworthiness of carbon fiber reinforced plastic composite tubes

Hygrothermal aging effect on the water diffusion in glass fiber reinforced polymer (GFRP) composite: Experimental study and numerical simulation

Effect of Thermal Aging on Viscoelastic Behavior of Thermosetting Polymers under Mechanical and Cyclic Temperature Impact

Accelerated Zero-Stress Hydrothermal Aging of Dry E-Glass Fibers and Service Life Prediction Using Arrhenius Model

Hygrothermal Behavior of Carbon Fiber Fabric Reinforced Vinylester Resin Composite Structures

Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fiber/bismaleimide (BMI) composite

Hydrothermal aging mechanisms and service life prediction of twisted bamboo fiber wound composites