Abstract:Due to the injection molding process, short fiber-reinforced thermoplastic composites show a complex fiber orientation distribution and, as a consequence, an overall anisotropic mechanical behavior. The monotonic and cyclic mechanical behavior of PolyEtherEtherKetone thermoplastic reinforced with 30 wt.% of short carbon fibers was characterized through a series of tests generating various complex loading histories (loading–unloading with creep or recovery steps, cyclic loading with various stress amplitudes) performed at room temperature on samples with various homogeneous and heterogeneous fiber orientation distributions. A three-dimensional model relying on a thermodynamic framework was then developed to represent the anisotropic mechanical behavior of the material, including elastic, viscoelastic, and plastic phenomena. Relevant constitutive laws were defined to describe the phenomena within wide ranges of loading rates and levels, with a limited number of parameters. Elastic anisotropy and plastic anisotropy were naturally described by using a two-step homogenization method and a Hill-like equivalent stress taking into account the fiber orientation distribution. The model was implemented into a finite element code to be able to simulate the response of complex parts with a heterogeneous fiber orientation distribution subjected to a heterogeneous loading. Model parameters were identified by applying a robust and original approach relying on a limited number of relevant experiments. The prediction capability of the model was demonstrated by simulating several types of tests not used for the identification, covering a wide range of monotonic and cyclic, homogeneous and heterogeneous, loading conditions, for various simple and complex fiber orientation distributions. In particular, the model is shown to be able to predict the energy dissipated in the material when subjected to cyclic loading.

Structural Model of Spatially and Plane Reinforced Medium from Rigid-Plastic Anisotropic Materials with Different Yield Limits under Tension and Compression

Modeling the Yield Surface of a Composite Medium Made from Rigid-Plastic Materials Using Piecewise Quadratic Yield Criteria the Case of a Symmetric Plane Reinforcement 2. The Case of a Symmetric Plane Reinforcement

The Anisotropic Distortional Yield Surface Constitutive Model Based on the Chaboche Cyclic Plastic Model.

On the Static and Dynamic Properties of Fiber-Reinforced Polymer Composites: A Three-Phase Constitutive Model

Three-Dimensional Constitutive Model for Anisotropic Inelastic Deformation of Unidirectional Reinforced Composites

A Generalized, Computationally Versatile Plasticity Model Framework - Part I: Theory and Verification Focusing on Tension‒compression Asymmetry

A Dynamic Constitutive Model for Fiber-Reinforced Composite under Impact Loading

Nonlinear Constitutive Model for Fiber Reinforced Composites with Different Properties in Tension and Compression

A Constitutive Model for Elastoplastic-Damage Coupling Effect of Unidirectional Fiber-Reinforced Polymer Matrix Composites

Interpolation-based Plane Stress Anisotropic Yield Models

Micromechanical Prediction of Elastic-Plastic Behavior of a Short Fiber or Particle Reinforced Composite

A combined viscoelasticity-viscoplasticity-anisotropic damage model with evolving internal state variables applied to fiber reinforced polymer composites

A Compact Plane Stress Yield Function Formulation

YIELDING BEHAVIOR OF PARTICLE REINFORCED METAL MATRIX COMPOSITE

A strain rate dependent and anisotropic failure material model for short fiber reinforced plastics based on energy density accounting for local fiber orientation

Cohesive Models for Anti-Plane Mode Fracture in Dissimilar Structures: Effect of Small/Large Scale Yielding Conditions on Computed Fracture Load

An Anisotropic Hyperelastic Constitutive Model with Tension–Shear Coupling for Woven Composite Reinforcements

A Homogenized Constitutive Model for 2D Woven Composites under Finite Deformation: Considering Fiber Reorientation

An Anisotropic Constitutive Model with Biaxial-tension Coupling for Woven Composite Reinforcements

A model to describe the cyclic anisotropic mechanical behavior of short fiber-reinforced thermoplastics

An Anisotropic Damage-Plasticity Constitutive Model of Continuous Fiber-Reinforced Polymers