Abstract:Ensuring the stability of slopes is critical to the safe operation of geotechnical engineering. Evaluating slope stability to minimize geologic risks induced by destabilization is significant in reducing casualties and property damage. A conventional, single-coefficient strength reduction method is widely applied in slope stability analyses, but this method ignores the attenuation degree of different parameters in the slope destabilization. A new double-strength reduction method considering different contributions of the mechanics' parameters is proposed in this study for evaluating the stability of nonhomogeneous slope. First, the role of each mechanic's parameters in the slope destabilization was investigated theoretically and numerically using ABAQUS software 2022. The results indicate that the effect of elasticity (E), Poisson's ratio (v), and soil gravity (γ) on the evolution of factor of safety (FOS) are insignificant and can be neglected compared with cohesive force (c), and angle of internal friction (φ). Next, an improved method was constructed to correlate the FOS with cohesive force (c) and the angle of internal friction (φ). Then, a numerical method was constructed based on the computation of the mathematical–mechanical relationship between FOS and the mechanical parameters, and the stability of slope is estimation based on the Mohr–Coulomb yield criterion. Finally, the double-strength reduction coefficient method proposed in this study, the limit equilibrium method, and the traditional finite element strength reduction coefficient method were applied to nonhomogeneous slopes and slopes containing a soft underlying layer for comparison, and the difference between them was within the range of ±5%. The results indicate that both the limit equilibrium method and the traditional finite element strength reduction method tend to overestimate the FOS of intricate slopes compared with the evaluated method proposed in this study. This parallel comparison serves to validate the accuracy of the double-strength reduction method proposed in the present study. Further, based on the proposed method, the relationship between slope stability and slope displacement is established, which provides a theoretical basis for the safety assessment of slope engineering.

A two-step dynamic FEM-FELA approach for seismic slope stability assessment

Multiscale Modeling of Seepage-Induced Suffusion and Slope Failure Using a Coupled FEM–DEM Approach

Dynamic stability analysis of jointed rock slopes using the combined finite-discrete element method (FDEM)

Combination of slices method and FEM for slope stability analysis of foundation pit under the seepage condition

Seismic stability and failure mode of the slope containing a two-pile foundation

Slope Stability Analysis Based on the Coupled Eulerian-Lagrangian Finite Element Method

Slope stability analysis using elastic finite element stress fields

Stability of slopes in partially saturated soils: Incorporating the combined effects of seismic forces and pore water pressure

A Novel Strength Reduction Method for a Slope Stability Assessment Based on a Finite Element Method

DEM–FEM Analysis of Soil Failure Process Via the Separate Edge Coupling Method

LEM-DEM Coupling for Slope Stability Analysis

Probabilistic Assessment of Seismic Stability of a Rock Slope by Combining the Simulation of Stochastic Ground Motion with Permanent Displacement Analysis

Seismic slope stability and failure process analysis using explicit finite element method

Dynamic Limit Equilibrium Analysis of Sliding Block for Rock Slope Based on Nonlinear FEM

A Pseudo-dynamic Approach for Seismic Stability Analysis of Rock Slopes in Hoek–Brown Media

SLOPE STABILITY ANALYSIS USING MONTE CARLO TECHNIQUE WITH FEM

Investigation of the slope stability problem using the Material Point Method

Stability and Reinforcement Analysis of Rock Slope Based on Elasto-Plastic Finite Element Method

Stability analysis of reservoir slopes under fluctuating water levels using the combined finite-discrete element method

Stability analysis of unsaturated soil slope by 3-D strength reduction FEM

The evaluation for dynamic safety coefficient of rock slope under seismic loading