Abstract:Recent advances on high temperature air combustion (HiTAC) have demonstrated significant energy savings, higher and uniform thermal field, lower pollution, and smaller size of the equipment for a range of furnace applications. The HiTAC technology has evolved from the conception of excess enthalpy combustion (EEC) to high and ultra-high preheated air combustion. In the HiTAC method, combined heat regeneration and low oxygen methods are utilized to enlarge and control the flame thermal behavior. This technology has shown promise for much wider applications in various process and power industries, energy conversion, and waste to clean fuel conversion. For each application the flow, thermal, and chemical behavior of HiTAC flames must be carefully tailored to satisfy the specific needs. Qualitative and quantitative results are presented on several gas-air diffusion flames using high-temperature combustion air. A specially designed regenerative combustion test furnace facility, built by Nippon Furnace Kogyo, Japan, was used to preheat the combustion air to elevated temperatures. The flames with highly preheated combustion air were significantly more stable and homogeneous (both temporally and spatially) as compared to the flames with room-temperature combustion air. The global flame features showed the flame color to change from yellow to blue to bluish-green to green over the range of conditions examined. In some cases hybrid and purple color flame was also observed. Under certain conditions flameless or colorless oxidation of the fuel has also been demonstrated. Information on global flame features, flame spectral emission characteristics, spatial distribution of OH, CH, and C2 species and emission of pollutants has been obtained. Low levels of NOx along with negligible levels of CO and HC have been obtained using high-temperature combustion air. The thermal and chemical behavior of high-temperature air combustion flames depends on fuel property, preheat temperature, and oxygen concentration of air. Waste heat from a furnace in high-temperature air combustion technology is retrieved and introduced back into the furnace using regenerator. These features help save energy, which subsequently also reduce the emission of CO2 (greenhouse gas) to the environment. Flames with high temperature air provide significantly higher and uniform heat flux than normal air, which reduces the equipment size or increases the process material throughput for same size of the equipment. The high-temperature air combustion technology can provide significant energy savings (up to about 60%), downsizing of the equipment (about 30%), and pollution reduction (about 25%). Fuel energy savings directly translates to a reduction of CO2 and other greenhouse gases to the environment.

Recent progress in high-temperature catalytic combustion

Recent advances in high temperature catalytic combustion

New Trends in Catalytic Reaction for High-Temperature and Low-Emission Combustion Technologies

A review on catalytic methane combustion at low temperatures: Catalysts, mechanisms, reaction conditions and reactor designs

Preparation of Nickel-Foam-supported Pd/NiO Monolithic Catalyst and Construction of Novel Electric Heating Reactor for Catalytic Combustion of VOCs

Recent Advances in Catalysts for Methane Combustion

Experimental study of low-temperature combustion performance in hydrogen/air mixtures over Pt–Cu/HZSM-5/cordierite bimetallic catalysts

Mechanisms And Applications Of Catalytic Combustion Of Natural Gas

Improving the NH3 Oxidation and Removing NOx During Ammonia-Rich Fuel Catalytic Combustion Using the Ag/CuOx@SiO2 Catalyst with High-Temperature Catalytic Activity

Advances in Research on Combustion Characteristics Involved in High Temperature Air Combustion Technique

Research Progress in the Sulfur Resistance of Catalytic Combustion Catalysts

High-temperature Resistant BaO-Y2O3 Catalysts with Different Morphologies for NO Decomposition and Mechanism Study

Novel metallic electrically heated monolithic catalysts towards VOC combustion

Progress of Catalytic Combustion of CVOC

Thermal Characteristics of Gaseous Fuel Flames Using High Temperature Air

On Mechanism And Optimization Of High Temperature/Low Oxygen Combustion

A Highly Efficient Catalytic Co-Combustion of Aromatic and Oxygenated Volatile Organic Compounds (VOCs) via H2-Driven Onsite Heating

The recent advances and future challenges for the catalytic combustion of light hydrocarbon VOCs

Experimental and modelling studies of the catalytic combustion of methane

Catalytic Combustion of Methane: From Mechanism and Materials Properties to Catalytic Performance

Combustion in the future: The importance of chemistry