Abstract:Traditional location methods such as time of arrival and direction of arrival have been widely used to locate transient radiation sources. However, these approaches neglect the directional radiation pattern of the sources. Locating directional sources is a complicated task because the waveform and the amplitude of radiated signals in the time domain vary for different directions. In this article, the ability of the electromagnetic time reversal (EMTR) technique to locate directional sources is investigated. As a typical directional source, the impulse radiation antenna (IRA) is used to validate the method. A radiation model is first established, and the time reversal procedure is carried out in the frequency domain. The amplitude of the signals is kept constant in the reverse phase in order to eliminate the distance attenuation. After analyzing the characteristics of directionality, we choose the energy criterion to estimate the position of the source since the time reversed signals would add up in phase only at the position of the source. It is shown that the point with the maximum energy of the synthesized signal corresponds to the position of the source. Numerical validations are presented and the relationship between the spatial resolution and the influencing factors such as the central frequency and the bandwidth of the excitation, the background noise level, the baseline length, and the number of sensors, are discussed in this article. Experimental results in an anechoic chamber with an impulse radiation antenna as the radiator and multiple horn antennas as the receivers are presented which confirm the ability of the EMTR-based method to locate directional radiation sources. Furthermore, we show that the location accuracy obtained with the energy criterion is better than that obtained with the ∞-norm criterion in the considered scenarios.

The Time-Reversal Method for Source Reconstructions Within a Metallic Cavity: An Experimental Validation

Experimental Investigation of Selective Localisation by Decomposition of the Time Reversal Operator and Subspace-Based Technique

A Time-Reversal Method for Time-Harmonic Electromagnetic Source Reconstruction

Measurement of insertion loss for underwater acoustic passive materials with time reversal technique

Time-reversal Target Detection with Interactive Transmission and Reception

Detection of Objects Underneath the Water-Sediment Interface Based on Time Reversal Processing

Marchenko Equation for Time Reversal Imaging in an Underwater Acoustic Waveguide

Combination of Time-Reversal Focusing and Nulling for Detection of Small Targets in Strong Reverberation Environments

Hybrid experimental/computational approach to Time Reversal source localization in thin plates using image source method

A Correlation-Based Electromagnetic Time Reversal Technique to Locate Indoor Transient Radiation Sources

Time-Reversal Source Reconstruction with Space and Time Kurtoses

Locating Transient Directional Sources in Free Space Based on the Electromagnetic Time Reversal Technique

Sound Source Localization Method Based on Time Reversal Operator Decomposition in Reverberant Environments

Localization of the Radiated-PIM Source Based on the Truncated Time Reversal Operator-MUSIC Imaging: an Experimental Validation

Structure Reconstruction Method in the Multi-port Cavity Based on Broadband Time-Reversal

A High-Resolution Time Reversal Method for Target Localization in Reverberant Environments

A Virtual Time Reversal Method for Passive Source Localization in A Range-Dependent Waveguide

Probe Design and Source Reconstruction for Near-Field Scanning and Modeling

Time-Reversal Mirror-Virtual Source Array Method for Acoustic Imaging of Proud and Buried Targets

Super-Resolution Focusing of Time Reversal Electromagnetic Waves in Metal Wire Array Medium

Focused Field Estimation of Time Reversal Waves from Wireless Sensors in Scattered Environments