Abstract:Off-line programming of the polishing tool trajectory for complex workpieces is challenging due to the nontrivial material removal model and the polishing accuracy requirement. Current tool trajectory planning methods are mainly developed for some simple surfaces but cannot handle the increasingly complicated industrial parts, such as the wheel hubs. This article first develops a numerical contact mechanics model for the point-sampled complex workpieces. The contact pressure distribution and the material removal depths on the workpiece point cloud can be predicted efficiently. A novel high-priority subregion searching algorithm is developed to track the most-worth-polishing workpiece points. By selecting the path pattern as direction-parallel, the path direction, tool dwell times, and the path spacings inside each extracted subregion are optimized to minimize the deviation from the desired material removal depths. The effectiveness of the proposed method is verified by performing disk polishing simulations on workpieces with different shapes. A robotic polishing experiment is also conducted on a wheel hub. Both simulation and experimental results show that reasonable tool trajectories can be generated on the workpiece, and the desired material removal depths can be achieved. Note to Practitioners—In robotic polishing industries, it is crucial to plan the tool trajectory (tool path and feed velocity) to achieve desired material removal depths on the workpiece surface, which means high surface quality. In this article, a model-based tool trajectory planning method for robotic polishing of complex surfaces that are represented by the point cloud form is presented. The advantage of using the point cloud is that workpiece surfaces with varying curvatures and complex features, e.g., grooves and holes, need not be expressed explicitly. The proposed method generates high-priority subregions according to the updated material removal distribution dynamically. In this work, the polishing path pattern is chosen as direction-parallel. Based on an efficient numerical contact mechanics and material removal model, the path locations and the tool dwell times inside each subregion are optimized to minimize the deviation between the actual and the desired material removal depths. When the desired material removal depths are attained in an extracted subregion, the algorithm finds the next high-priority subregion until the whole workpiece is well polished. The trajectory planning method can be integrated into an industrial robot with the force-control module. Future work is to integrate the roughness model into the tool trajectory planning method.

NURBS function closed-loop mapping trajectory planning of serial robotic plasma cladding for complex surface coatings

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Drilling Task Planning and Offline Programming of a Robotic Multi-Spindle Drilling System for Aero-Engine Nacelle Acoustic Liners

A Feedrate Planning Method for the NURBS Curve in CNC Machining Based on the Critical Constraint Curve

An algorithm for trajectory planning of complex surface parts for laser cladding remanufacturing

Template-Free Nonrevisiting Uniform Coverage Path Planning on Curved Surfaces

Smooth Non-Uniform Rational B-spline (NURBS) Machining with Kinematic Limit for Short Linear Segments

Research on Adaptive Feedrate Planning of NURBS Curves for CNC System

A bisection method for the milling of NURBS mapping projection curves by CNC machines

Trajectory and Velocity Planning Algorithm Based on NUBRS curve

Laser Cladding Path Planning for Curved Metal Parts

A Trajectory planning technique for grinding and polishing aerospace turbine blades' thermal barrier coatings based on PCL point cloud processing

The High-Energy Micro-Arc Spark–computer Numerical Control Deposition of Planar NURBS Curve Coatings

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

Worn area modeling for automating the repair of turbine blades

Robotic Trajectory Planning for Non-Destructive Testing Based on Surface 3D Point Cloud Data

A Model-Based Trajectory Planning Method for Robotic Polishing of Complex Surfaces.

NURBS-based path planning for aerosol jet printing of conformal electronics

A complete S-shape feed rate scheduling approach for NURBS interpolator.

The Forming Control Method of Multi-Track Laser Cladding on Curved Surface

Region-based path planning method with all horizontal welding position for robotic curved layer wire and arc additive manufacturing