Abstract:The WNbMoTa-based refractory high entropy alloy (RHEA) is expected to become a new generation of hightemperature materials due to its high thermal stability, which can be used in aerospace, nuclear energy and other fields. In this paper, TN10 (TN is the abbreviation of Ti and Ni elements), TN15, TN20 and TN25 nonequimolar WNbMoTa-based RHEAs were designed based on phase engineering and formed by laser powder bed fusion (LPBF) technology. The solidification thermodynamics, microstructure and mechanical properties (compressive strength at 25 degrees C) of the four alloys were analyzed, and the strengthening mechanism of TN20 alloy was studied. The compressive yield strength of the four alloys exceeds 2050 MPa, the ultimate compressive strength exceeds 2550 MPa, and the elongation exceeds 9%. The compressive yield strength of TN20 alloy is 2513 MPa, the ultimate strength is 3127 MPa, and the elongation is 11.38%. The room temperature (25 degrees C) compressive yield strength of TN20 alloy is the highest among the high entropy alloys studied so far. TN20 alloy is composed of BCC matrix phase and grain boundary phase containing three different structures, which are B2 TiNi phase, Ni55Nb25Ti15Ta5 phase generating stacking faults and Ni70Ti20Nb10 secondary precipitated phase. The micrometer matrix phase and nanometer grain boundary phase of TN20 alloy show a network distribution in fine crystal region. After the matrix phase cracks due to high thermal stress, the flow TiNi-rich grain boundary phases precipitate to fill the cracks. The grain boundary phase with high proportion in this region is enhanced by the secondary phase and its nanoprecipitated phase. In other regions, stacking faults are generated by the Ni55Nb25Ti15Ta5 phases, which convert the thermal stress that induces crack into lattice defects of the crystal. On the other hand, the content of B2 phase is the highest in grain boundary phase, and the grain boundary between B2 phase and matrix phase is a coherent grain boundary, which realizes the high quality combination of grain boundary phase and matrix phase. The design and strengthening of WNbMoTa-based nonequimolar RHEAs are studied in this paper, which is expected to provide a reference for the design of a new generation of high entropy alloy.

Perspectives on novel refractory amorphous high-entropy alloys in extreme environments

Enhancing Irradiation Resistance in Refractory Medium Entropy Alloys with Simplified Chemistry

A quinary WTaCrVHf nanocrystalline refractory high-entropy alloy withholding extreme irradiation environments

An innovative materials design protocol for the development of novel refractory high-entropy alloys for extreme environments

Edge-dislocation-induced ultrahigh elevated-temperature strength of HfMoNbTaW refractory high-entropy alloys

Oxide dispersion strengthening mediated ultra-high strength at wide temperature range in NbTaTiV refractory high-entropy alloys

Intrinsic factors responsible for brittle versus ductile nature of refractory high-entropy alloys

Microstructures and mechanical properties of novel MoTaVW refractory high-entropy alloys

Refractory High‐Entropy Alloys Produced from Elemental Powders by Severe Plastic Deformation

Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys

A Nitride-Reinforced NbMoTaWHfN Refractory High-Entropy Alloy with Potential Ultra-High-Temperature Engineering Applications

High-temperature structural and mechanical stability of refractory high-entropy alloy Nb40Ti25Al15V10Ta5Hf3W2

CALPHAD-aided design for superior thermal stability and mechanical behavior in a TiZrHfNb refractory high-entropy alloy

Microstructural Evolution and Mechanical Behavior of Novel TiZrTaxNbMo Refractory High-Entropy Alloys

Uniting superior mechanical properties with oxidation resistance in a refractory high-entropy alloy via Cr and Al alloying

A review of refractory high-entropy alloys

Microstructure and Mechanical Properties of the Ductile Al–Ti–Mo–Nb–V Refractory High Entropy Alloys

Development of Oxidation Resistant Refractory High Entropy Alloys for High Temperature Applications: Recent Results and Development Strategy

Microstructures and mechanical properties of Ta–Nb–Zr–Ti–Al refractory high entropy alloys with varying Ta/Ti ratios

Composition control and heat treatment effect on characteristics of ZrNbTaHf x refractory high entropy alloys

Design and Coherent Strengthening of Ultra-High Strength Refractory High Entropy Alloys Based on Laser Additive Manufacturing