Abstract:Efficient exploitation of agricultural waste results in a more sustainable and ecofriendly environment since it lessens the burden of their disposal, which has become increasingly important in recent times. Due to their high mechanical strength and high thermal stability, these biodegradable low-value agrosolid wastes have the potential to successfully replace synthetic fibers and fillers in polymer matrices in the form of reinforcements. This work deals with the addition of low-cost and renewable hybrid natural fillers, tamarind seed filler (TMS), and peanut shell powder (PNS) as particulate reinforcements to the vinyl ester (VE) resin. Traditional compression molding creates TMS/PNS-VE hybrid composites with filler loadings ranging from 5% to 30%. After the composites were fabricated, they were tested for strength properties and heat deflection temperature. A detailed experimental analysis of the mechanical properties was conducted. According to the findings, 20 wt.% hybrid filler loading to the vinyl ester polymer exhibited peak tensile, flexural, and impact strengths of 40.3 MPa, 142 MPa, and 16 kJ/m2, respectively, which is 1.52, 1.69, and 1.29 times the properties of the virgin polymer. However, the peak elongation at break 3.9% was obtained at 30 wt.%. Similarly, the heat deflection temperature (HDT) test of TMS/PNS-VE composites showed a maximum rise of 50.91% at 25 wt.% of filler loading. This is 1.51 times greater than the heat deflection temperature of the pure vinyl ester resin. The findings made it quite clear that adding 20 wt.% biosolid waste hybrid particulate fillers made out of tamarind seed and peanut shell to vinyl ester is the optimum weight, which improves the mechanical and thermal properties of the TMS/PNS-VE composite, making it suitable for making cost-effective materials for lightweight applications. This study also utilizes scanning electron microscopy (SEM) to investigate the microstructural characteristics of the composites, correlating these features with their mechanical performance.

Investigation of mechanical and morphological traits with the effect of turtle shell powder in kenaf-epoxy composite

Effect of kapok seed powder on mechanical and water intake properties of untreated kenaf fiber composites

Effect of hybridization of novel African teff and snake grass fibers reinforced epoxy composites with bio castor seed shell filler: Experimental investigation

Studies on mechanical and water absorption behavior of biofiber-reinforced epoxy biocomposites added with seashell, eggshell, and coconut biofillers

Experimental study on mechanical properties of groundnut shell particle-reinforced epoxy composites

Effect of calcium carbonate nanoparticles on mechanical properties of coir-kenaf based epoxy hybrid composites: An analytical and simulation study

Enhancing the mechanical performance of carbon fiber reinforced polymer using carbonized coconut shell particles

Effect of Amino Silane Grafted Cellulose and Kenaf Fibers in Mechanical, Impact Toughness and Drilling Characteristics of Epoxy Resin Composite

Evaluation of mechanical and water absorption properties of kevlar/carbon/basalt fibers reinforced nano cellulose particulates Bisphenol-F LY556 epoxy composite

Mechanical, machinability and water absorption properties of novel kenaf fiber, glass fiber and graphene composites reinforced with epoxy

Investigations on Low-Velocity Ballistic Impact behaviour of Kevlar / Epoxy Composites Reinforced with Chopped Wet Spun Fibers Intruded with Nanofillers

Tamarind seed powder as filler in polypropylene and its impact on the mechanical and biodegradability of the composites

Influence of Accelerated Weathering on the Mechanical, Fracture Morphology, Thermal Stability, Contact Angle, and Water Absorption Properties of Natural Fiber Fabric-Based Epoxy Hybrid Composites

A comprehensive experimental study of eco-friendly hybrid polymer composites using pistachio shell powder and Aquilaria agallocha Roxb

Investigation of Mechanical and Thermal Stabilities of Tamarind Seed- and Peanut Shell Powder-Reinforced Vinyl Ester Composite

Analysis of the Hybrid of Mudar/Snake Grass Fiber-Reinforced Epoxy with Nano-Silica Filler Composite for Structural Application

Mechanical (Static and Dynamic) Characterization and Thermal stability of hybrid green composites for Engineering Applications

Influence of fish-scale powder addition and stacking order on mechanical and thermal properties of hybrid kenaf/glass polyester composites

A comprehensive study on the effect of small rates of walnut shell and talc fillers on the thermal,mechanical, and morphological properties of epoxy hybrid composites

Effect of eggshell powder on polyvinyl ester composite: A statistical correlation on mechanical strength

Physio-mechanical and thermal behavior of kenaf (Hibiscus cannabinus L.) fiber-reinforced epoxy composites: effect of eco-friendly treatment