Abstract:Metal halide perovskite solar cells (PSCs) have undergone rapid progress. However, unstable performance caused by sensitivity to environmental moisture and high temperature is a major impediment to commercialization of PSCs. In the present work, a low-temperature, glass-glass encapsulation technique using high performance polyisobutylene (PIB) as the moisture barrier is investigated on planar glass/FTO/TiO2/FAPbI3/PTAA/gold perovskite solar cells. PIB was applied as either an edge seal or blanket layer. Electrical connections to the encapsulated PSCs were provided by either the FTO or Au layers. Results of a "calcium test" demonstrated that a PIB edge-seal effectively prevents moisture ingress. A shelf life test was performed and the PIB-sealed PSC was stable for at least 200 days. Damp heat and thermal cycling tests, in compliance with IEC61215:2016, were used to evaluate different encapsulation methods. Current-voltage measurements were performed regularly under simulated AM1.5G sunlight to monitor changes in PCE. The best results we have achieved to date maintained the initial efficiency after 540 h of damp heat testing and 200 thermal cycles. To the best of the authors' knowledge, these are among the best damp heat and thermal cycle test results for perovskite solar cells published to date. Given the modest performance of the cells (8% averaged from forward and reverse scans) especially with the more challenging FAPbI3 perovskite material tested in this work, it is envisaged that better stability results can be further achieved when higher performance perovskite solar cells are encapsulated using the PIB packaging techniques developed in this work. We propose that heat rather than moisture was the main cause of our PSC degradation. Furthermore, we propose that preventing the escape of volatile decomposition products from the perovskite solar cell materials is the key for stability. PIB encapsulation is a very promising packaging solution for perovskite solar cells, given its demonstrated effectiveness, ease of application, low application temperature, and low cost.

Prevention of potential‐induced degradation using a moisture barrier in crystalline silicon photovoltaic modules

Reduction of Potential-Induced-Degradation of p-Type PERC Solar Cell Modules by an Ion-Diffusion Barrier Layer Underneath the Front Glass

Potential-induced degradation of encapsulant-less p-type crystalline Si photovoltaic modules

Supercharging cell-level potential-induced degradation (PID) testing using a salt-enriched hybrid polymer layer

Characterization of rear-side potential-induced degradation in bifacial p-PERC solar modules

Suppression of potential-induced degradation in monofacial PERC solar cells with gradient-designed capping layer

Investigation of Potential‐Induced Degradation and Recovery in Perovskite Minimodules

Improved Crystallinity and Self-Healing Effects in Perovskite Solar Cells Via Functional Incorporation of Polyvinylpyrrolidone

Investigation on Potential-Induced Degradation in a 50mwp Crystalline Silicon Photovoltaic Power Plant

Regular and Irregular Performance Variation of Module String and Occurred Conditions for Potential Induced Degradation-Affected Crystalline Silicon Photovoltaic Power Plants

Electro-analytical investigation of potential induced degradation in mc-silicon solar cells: case of sodium ion induced inductive loop

Method to Study PID of Perovskite Solar Cells and Modules in an Inert Environment

Field‐representative evaluation of PID‐polarization in TOPCon PV modules by accelerated stress testing

Accelerated Lifetime Testing of Organic-Inorganic Perovskite Solar Cells Encapsulated by Polyisobutylene

Sodium Diffuses from Glass Substrates through P1 Lines and Passivates Defects in Perovskite Solar Modules

Influence of Perfluorinated Ionomer in PEDOT:PSS on the Rectification and Degradation of Organic Photovoltaic Cells

Similarity of potential-induced degradation in superstrate-type thin-film CdTe and Si photovoltaic modules

Mitigating the Lead Leakage of High-Performance Perovskite Solar Cells via In Situ Polymerized Networks

Impact of partial shading on the performance and reliability of potential-induced degraded crystalline silicon PV module

Machine learning-assisted screening of effective passivation materials for P–I–N type perovskite solar cells

Reduction of lead leakage from damaged lead halide perovskite solar modules using self-healing polymer-based encapsulation