Abstract:The study of porous liquids (PLs) using molecular dynamics (MD) simulation is one of the most interesting and attractive research topics. The possibility of creating permanent porosity in a solvent and increasing its adsorption capacity is very practical. The purpose of the present study is to examine how an MD model can be developed to evaluate the possibility of PL formation. Additionally, the validation of the model was conducted by simulations using two metal–organic frameworks (MOFs) including zeolitic imidazolate framework-8 (ZIF-8) and Hong Kong University of Science and Technology-1 (HKUST-1) as porogens and water (H2O) and triethylene glycol (TEG) as solvents. The results revealed that H2O and TEG are incapable of penetrating the ZIF-8 pores due to their small size and unfavorable thermodynamics; however, both solvents easily penetrate through the large HKUST-1 pores. These observations aligned with findings from experimental literature studies, thus confirming the validity of the model. In order to expand the model's scope, the developed model was used to assess the possibility of PL formation using ZIF-8 and HKUST-1 with different pore and window sizes and shapes, and a wide range of hydrocarbon liquids with different molecular sizes and shapes as solvents. It was found that ZIF-8 can form PLs with a more extensive range of sterically hindered solvents due to its smaller apertures and incompatible shape. In addition, only a few solvents (e.g., n-pentane, benzene, 1,3,5-trimethylbenzene, 1,3,5-triisopropylcyclohexane, and 1,3,5-triisopropylbenzene) can partially penetrate its ZIF-8 pores without steric hindrance. These privileged solvents typically have an aspect ratio far from 1, indicating a more elongated shape, and/or more linear branches. In contrast, HKUST-1, which has larger apertures and a compatible shape, allows for complete penetration of specific solvents (e.g., benzene, iso-octane, n-pentane), thereby preventing PL formation with such combinations. In addition, cyclohexane has the ability to partially penetrate the pores of HKUST-1. Therefore, in addition to the size of the solvent molecule, one of the most important properties for penetration is the compatibility of the shape of the porogen pore window with the shape of the solvent molecule. This research provides important new information on how PLs come to be by illuminating the role that solvent molecules and porogen play in promoting penetration and, in the end, impacting the process of PL formation.

Preserving Mesoporosity in Type III Porous Liquids through Dual‐layer Surface Weaving

Structuring Metal-Organic Framework Materials into Hierarchically Porous Composites Through One-Pot Fabrication Strategy

Interconnected Porous Monolith Prepared Via UiO-66 Stabilized Pickering High Internal Phase Emulsion Template

Type I Porous Liquids with Super‐Low Viscosities: the Construction through a Rather Simple One‐Step Covalent Linkage Strategy and Its Facile Regulation by a Mixed‐Ligand Strategy

Design Principles Guiding Solvent Size Selection in ZIF-Based Type 3 Porous Liquids for Permanent Porosity

Preparation of Stable Multilayer PDMS Composite Pervaporation Membrane Incorporated with In-Situ Transformed Metal Organic Frameworks for Enhanced Butanol Recovery

Amino-functionalized ZIFs-based Porous Liquids with Low Viscosity for Efficient Low-Pressure CO2 Capture and CO2/N2 Separation

Revolutionizing Porous Liquids: Stabilization and Structural Engineering Achieved by A Surface Deposition Strategy

Development of a Molecular Dynamics Model to Assess the Possibility of Type II/III Porous Liquid Formation

Distillation of Alcohol/water Solution in Hybrid Metal–organic Framework Hollow Fibers

Underlying Polar and Nonpolar Modification MOF-Based Factors that Influence Permanent Porosity in Porous Liquids

Zeolitic Imidazolate Frameworks-Based Porous Liquids with Low Viscosity for CO2 and Toluene Uptakes

Exploitation of Pore Structure for Increased CO2 Selectivity in Type 3 Porous Liquids

A “teardown” method to create large mesotunnels on the pore walls of ordered mesoporous silica

Exploitation of Pore Structure for Increased CO 2 Selectivity in Type 3 Porous Liquids

Underlying Solvent-Based Factors That Influence Permanent Porosity in Porous Liquids

Thermally-Conductive-Pin Patterned Substrate: Innovative Strategy for Controlled Formation of Tubular Pores in Biodegradable Polymer Membranes

What Matters to Fabrication of Type II Porous Liquids: A Case Study on Metallocages and Bulky Ionic Liquid?

Precise Modulation of Surface Layer Dynamics for Tunable Flowability and Gas Absorption Properties of Molecular Porous Liquids

Fabrication of Dimensional and Structural Controlled Open Pore, Mesoporous Silica Topographies on a Substrate

Fabrication Method for Structured Porous Polydimethylsiloxane (PDMS)