Abstract:The three-dimensional (3D) microstructure of neutron-irradiated uranium-10 wt.% molybdenum (U-10Mo) fuel with a burn-up of 9.8×10 21 fissions/cm 3 was characterized using a novel, multi-modal synchrotron micro-computed tomography approach combining propagation-based phase-contrast enhanced and absorption contrast techniques. The porosity development, porosity interconnectedness, swelling, composition, local thickness of the zirconium (Zr) diffusion barrier, and the influence of the fuel–cladding interaction on the local composition and pore morphology, were uniquely determined in 3D. Two cuboids were produced using a focused ion beam-scanning electron microscope at the Zr diffusion barrier–fuel interface and in the bulk fuel. The bulk fuel sample swelled by 53.3[+9.7/-3.1]%, while the fuel near the Zr–fuel interface swelled by 63.3[+14.7/-7.2]%. The average local thickness of the Zr diffusion barrier decreased by 53%, compared to the expected pre-irradiated thickness. Four pore morphology regions were identified initiating parallel to the fuel–Zr interaction region: (1) an interaction layer of suppressed porosity, (2) a layer of elongated and interconnected porosity, (3) a transition zone of low porosity, and (4) a layer of unoriented porosity representative of the bulk fuel behavior. The increase in porosity near the diffusion barrier corresponded to a higher U concentration compared to that in the bulk fuel. The interconnected porosity in the fuel near the diffusion barrier was extensive and oriented parallel to the diffusion barrier, while the bulk fuel had more compact and isolated pore networks. The interaction layer, despite having suppressed porosity, was nearly 100 wt.% U. Porosity suppression at the diffusion barrier corresponds to the expected reduction in radiation-driven diffusion of Xe at the interface despite the anticipated increase in fission product nucleation originating from a higher U concentration. The novel 3D insights of the porosity, swelling, and compositional variations characterized herein can improve the fidelity of fuel performance codes for proliferation-resistant fuels for research and test reactors.

Characterization of Fuel Cladding Chemical Interaction on a High Burnup U-10Zr Metallic Fuel via Electron Energy Loss Spectroscopy Enhanced by Machine Learning

The Effect of Temperature and Burnup on U-10Zr Metallic Fuel Chemical Interaction with HT-9: a SEM-EDS Study

Fuel Cladding Chemical Interactions for MOX Fuel in Fast Reactors

Understanding fission gas bubble distribution, lanthanide transportation, and thermal conductivity degradation in neutron-irradiated α-U using machine learning

Advanced Characterization-Informed Framework and Quantitative Insight to Irradiated Annular U-10Zr Metallic Fuels

Fuel-Clad Interactions: Uranium Nitride and Uranium Dioxide with FeCrAl and Ti-Modified Stainless Steel

Studies of Electrochemical Oxidation of Zircaloy Nuclear Reactor Fuel Cladding Using Time-Of-Flight-Energy Elastic Recoil Detection Analysis

Nano-mechanical property assessment of a neutron-irradiated HT-9 steel cladding and a fuel-cladding chemical interaction region of a uranium–10 wt% zirconium nuclear fuel

Neutronic Design and Evaluation of a PWR Fuel Assembly with Accident Tolerant-Fully Ceramic Micro-Encapsulated (AT-FCM) Fuel

Investigation on Thermo-Mechanical Performance of Fully Ceramic Microencapsulated Fuel

Modeling of Zirconium Atom Redistribution and Phase Transformation Coupling Behaviors in U-10Zr-Based Helical Cruciform Fuel Rods under Irradiation

The Effects of Irradiation on Structure and Leaching of Pure and Doped Thin-Film Ceria SIMFUEL Models Prepared via Polymer-Templated Deposition

Contributions to the mechanistic understanding of the microstructural evolution in irradiated U-Mo dispersion fuel

Thermomechanical Assessment of Fuel Rod Cladding Made of Zirconium Alloy and Silicon Carbide Material During Reactivity-Initiated Accident

Trace Impurities Identified as Forensic Signatures in CMX-5 Fuel Pellets Using X-ray Spectroscopic Techniques

Synchrotron Micro-Computed Tomography Analysis of Neutron-Irradiated U-Mo Fuel

In situ X-ray computed micro-tomography imaging of failure processes in Cr-coated Zircaloy nuclear fuel cladding materials

Metallographic Examination and Hydrogen Measurements of High-Burnup Spent Nuclear Fuel Cladding

Zirconium analysis in microscopic spent nuclear fuel samples by resonance ionization mass spectrometry

Fuel performance of chromium-coated zirconium alloy and silicon carbide accident tolerant fuel claddings

In situ high-temperature 3D imaging of the damage evolution in a SiC nuclear-fuel cladding material