Abstract:Transition-metal-activated sulfite [S(IV)] processes for water decontamination have recently received intense attention in the field of decontamination by advanced oxidation processes (AOPs). However, the drawback with respect to the secondary metal sludge contamination involved in various AOPs has been argued often. In this work, we developed a novel electro-sulfite (ES) process using stable and low-cost graphite electrodes to address that concern. Arsenite [As(III)] was used as the target compound for removal by the ES process because of its wide presence and high toxicity. Parameters, including cell voltage, S(IV) concentration, solution pH, and water matrix, and the mechanisms for reactions on anode and cathode were investigated in electrolytic cells containing one or two compartments, respectively. The results show that the ES process using 1 mM S(IV) and 2 V cell voltage oxidizes 5 μM As(III) at a rate of 0.127 min–1, which is 15-fold higher than mere electrolysis without S(IV) addition (0.008 min–1) at pH 7. Further studies using radical scavengers and electron spin resonance assays demonstrated that oxysulfur radicals (i.e., SO5•– and SO4•–) and HO• are responsible for As(III) oxidation in the ES process. However, HO2• produced via the oxygen reduction reaction in the EO process plays a major role in As(III) oxidation, which explains the lower reaction rate in the absence of S(IV). The effectiveness of the ES process was moreover evidenced by 60–82% As(III) oxidation in field water within 40 min. Overall, this work realizes the metal-free activation of S(IV) and significantly leverages the S(IV)-based water treatment technologies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.9b07078?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.9b07078</a>.Reaction between 1O2 and As(III); determination of second-order rate constants; determination of S(IV) by ion chromatography; determination of FFA and p-benzenediol by HPLC; speciation of As(III) and As(V); SEM of the electrode; economic analysis of different systems for As(III) oxidation; calculation of CE; experimental setup with the one-compartment and two-compartment electrolysis cells used in the ES and EO processes; photochemical reactor setup for 1O2 generation; As(III) oxidation in the ES process with different types of electrodes; comparison of the anodic electrode before and after use and SEM images of the new electrode and anodic electrode used for long time; As(III) oxidation at various initial As(III) concentrations in the ES process; effects of different buffers for the electro-sulfite system; effect of pH on As(III) oxidation in the EO process or with sulfite alone; effect of potential for As(III) oxidation in the EO process; change of As(III) concentration in the solutions containing H2O2 without electrolysis; changes of As(III) concentration in the EO process and the ES process in the presence of different scavengers; As(III) oxidation in the presence of H2O2 in the anodic compartment in the ES process; ESR spectra with DMPO as spin trap for HO• radicals in the EO process; changes of As(III) and FFA concentrations in the visible-light MB+ system; ESR spectra with TEMP as spin trap; changes of As(III) and p-benzenediol concentrations; changes of S(IV) and DO concentrations in the ES process; effect of matrix components on As(III) oxidation in the ES system; As(III) oxidation in real field waters using the ES process; changes of pH and DO concentration in the real field waters; changes of current in the ES process; characterizations of the field water samples; reactions among reactive species, As(III), and scavengers; and economic analysis based on the EE/O index of different systems (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.9b07078/suppl_file/es9b07078_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Performance of SPE electrodes in electrolytic regeneration process of desulfurization of iron complex

Electrochemical Removal of Hydrogen Sulfide and Recovery of the Deposited Sulfur on the Anode from Wastewater

Insight into the Effective Electrocatalytic Sulfide Removal from Aqueous Solutions Using the Surface Oxidized Stainless-Steel Anode and Its Desulfurization Mechanism

Effective Anodic Sulfide Removal Catalyzed by Single Nickel Atoms on Nitrogen-Doped Graphene with Stainless Steel Substrate

Effective Removal of Sb(V) from Aqueous Solutions by Electrocoagulation with Composite Scrap Iron-Manganese As an Anode.

TECHNOLOGICAL INDICATORS OF THE CATHODIC PROCESS IN THE REGENERATION OF USED SULFO-ACID SOLUTIONS FOR ETCHING STEEL

The Sulfide Oxidation in an Electrolytic Sulfide Oxidizing Bioreactor Using Graphite Anode

Efficient Treatment of High-Concentration Sulfurous Wastewater by Using Electrochemical Oxidation Process with Ti/SnO2–Sb Anode and Air Cathode

Insight into the effective electrocatalytic sulfide removal from aqueous solutions using surface oxidized stainless-steel anode and its desulfurization mechanism

Performance Improvement of the Liquid-Fed SO2-depolarized Electrolyzers for Anolyte with High H2SO4 Concentration

Study on in-situ electrochemical impedance spectroscopy measurement of anodic reaction in SO 2 depolarized electrolysis process

Desulfurization Wastewater-assisted Coal Electrolysis for Hydrogen Production in Coal-fired Power Plants

Electrochemical processes for simultaneous sulfur and energy recoveries from sulfide-containing wastewater

Redox performance of trivalent iron iminodisuccinic acid in converting hydrogen sulfide to sulfur: A new complexed iron catalyst

Metal-Free Electro-Activated Sulfite Process for As(III) Oxidation in Water Using Graphite Electrodes

Enhanced Desulfurization by Tannin Extract Absorption Assisted by Binuclear Sulfonated Phthalocyanine Cobalt Polymer: Performance and Mechanism

Devising a comprehensive technology for treating industrial iron sulfate-containing effluents of galvanic production

Efficient SO 2 Removal and Highly Synergistic H 2 O 2 Production Based on a Novel Dual-Function Photoelectrocatalytic System

Sublimed sulfur powders as novel effective anode additives to enhance the high-rate capabilities of iron anodes for advanced iron-based secondary batteries

Study on Electrochemical Impedance Spectroscopy and Cell Voltage Composition of a Pem So2-Depolarized Electrolyzer Using Graphite Felt As Diffusion Layer

SO2-depolarized Electrolysis Using Porous Graphite Felt As Diffusion Layer in Proton Exchange Membrane Electrolyzer