Characterization for 3D pore-fracture systems in Hot-Dry-Rock samples from Gonghe Basin, China

Supeng Zhang,Shouding Li,Linyou Zhang,Xufeng Li,Xianpeng Jin,Yanlong Kong,Yanhui Dong,Xiao Li
DOI: https://doi.org/10.1016/j.geothermics.2023.102886
IF: 4.566
2023-12-07
Geothermics
Abstract:As a new type of renewable energy, Hot-Dry-Rock (HDR) is gaining increasing attention. The physical properties of rock influenced by the pore-fracture structure are vital for the hydraulic and chemical characteristics of HDR reservoirs. However, the natural pore-fracture structure in HDR has not been sufficiently studied. To fulfill this gap, we used focused ion beam-scanning electron microscopy (FIB-SEM) to construct three-dimensional (3D) digital models for four granite samples from the deep HDR reservoir in Gonghe Basin, Qinghai Province, China, and obtained the nanoscale structure of the pores and fractures in HDR reservoir for the first time. Our analysis based on the 3D models indicates that the heat transfer area in the HDR reservoir is mainly from fractures and crack-like pores, but a large amount of small but regular pores could be neglected when heat transfer in HDR is considered. The permeability of HDR reservoirs at nanoscale varies from 9.414 nD to 0.082 mD, and the high permeability in this study is accompanied by throughgoing fractures. The variation of porosity and permeability of deep HDR at nanoscale in this study is much more severe than that of shallow granites previously studied at microscale. The performance of geothermal field is significantly influenced by the size of throats and the average size and tortuosity of the interconnected pore-fracture network in HDR. The hydraulic aperture could be 32-58% lower than the mechanical aperture of the natural fractures in HDR reservoirs, which is a vital clue for the numerical simulation associated with enhanced geothermal systems.
energy & fuels,geosciences, multidisciplinary
What problem does this paper attempt to address?