Abstract:The exploitation of geothermal energy commonly occurs at depths ranging from 3000 to 10000 m. At these depths, the surrounding rocks experience substantial temperature and pressure, leading to alterations in their physical and mechanical properties. The infiltration of drilling fluid into the wellbore result in thermal exchange with the surrounding rocks, causing a decrease in their strength and stability. Consequently, the wellbore becomes more susceptible to instabilities. This objective of this study was to investigate the physical and mechanical properties of heated granite under three distinct cooling methods: liquid nitrogen cooling, water cooling, and natural cooling. Based on experimental findings, this study enhanced the failure criteria for high-temperature granite and established a thermal-solid coupling model to assess the stability of wellbores in high-temperature granite formations. To examine the impacts of temperature variations between the wellbore and drilling fluid, analyze the stress distribution around the wellbore at various depths, and evaluate the consequences of high-temperature fluid intrusion on wellbore stability. The research indicates that: (1) Under identical high-temperature conditions, it has been observed that liquid nitrogen cooling causes the most significant damage to granite, followed by water cooling. On the other hand, natural cooling has the least detrimental effect on the rock. (2) With increasing temperature, the physical and mechanical properties of the rock undergo two distinct stages of change. The first stage is a gradual variation that occurs between 25 and 400 °C, while the second stage is a rapid variation observed between 400 and 800 °C. Notably, the temperature of 400 °C serves as a critical threshold for the observed property changes in this granite. (3) The rock failure criteria have been modified based on the thermal damage characteristics of cold fluid intrusion into granite and a thermal-hydraulic-mechanical coupled wellbore model has been established. (4) The numerical simulation results revealed that liquid nitrogen cooling had the greatest impact on wellbore temperature, stress, and damage zone. At 500 s, the temperature on the wellbore surface decreased by approximately 700 °C due to liquid nitrogen cooling. The circumferential stress and radial stress decreased by 180 MPa and 35 MPa, respectively. (5) After the intrusion of cold fluid into high-temperature granite, the stress around the wellbore decreases and the rate of decrease in circumferential stress is significantly greater than that of radial stress. This will increase the likelihood of wellbore instability.

Experimental study of mechanical properties of hot dry granite under thermal-mechanical couplings

Thermo-mechanical Coupling Characteristics of Granite under Triaxial Pressures and Ultrahigh Heating Rates

Hydraulic properties of stressed granite fractures with heat-induced void alteration

Study on the failure mechanism of high-temperature granite under two cooling modes

Effects of Different Cooling Treatments on Heated Granite: Insights from the Physical and Mechanical Characteristics

Mechanical properties of granite at high temperature subjected to true triaxial compression

A novel true triaxial test device with a high-temperature module for thermal-mechanical property characterization of hard rocks

Impacts of different cooling methods on the dynamic tensile properties of thermal-treated granite

Evolution of Elastic–Plastic Characteristics of Rocks Within Middle-Deep Geothermal Reservoirs Under High Temperature

Mechanical Behaviors of Granite After Thermal Treatment Under Loading and Unloading Conditions

Analysis of physical and mechanical properties of granite under different cooling methods under high-temperatures thermal cycles

Physical and Mechanical Properties of Granite after High-Temperature and Acidic Treatment for the Enhanced Geothermal System

Study on the dynamic characteristics of rock surrounding a wellbore in energy storage areas during deep geothermal energy mining

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Experimental study on the physical and mechanical variations of hot granite under different cooling treatments

Anisotropic strength, deformation and failure of gneiss granite under high stress and temperature coupled true triaxial compression

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Experimental and numerical simulation research on hot dry rock wellbore stability under different cooling methods

Effect of water-cooling shock on fracture initiation and morphology of high-temperature granite: Application of hydraulic fracturing to enhanced geothermal systems

Experimental investigation on mechanical behaviors of Nanan granite after thermal treatment under conventional triaxial compression

Triaxial Compressive Strength, Failure, and Rockburst Potential of Granite Under High-Stress and Ground-Temperature Coupled Conditions