Abstract:This study explores the application of AncorLam HR (Höganäs, Sweden), a soft magnetic composite material, in the stator core of an axial flux permanent magnet drive motor. Building on previous research that provided mechanical and thermal properties of the material, the focus is on analyzing how the manufacturing process affects the motor core's shape. A bulk prototype was created based on case 3, which demonstrated the least deviation in density and internal stress. The prototypes were produced under the conditions of SPM 7 and 90 °C, and a heat treatment in a nitrogen atmosphere for 1 h, resulting in an average density error of 0.54%, confirming process effectiveness. A microstructural analysis using scanning electron microscopy (SEM) on Sample 2, with the highest density, confirmed consistency between simulation and prototype trends. Electron backscatter diffraction (EBSD) and X-ray diffraction (XRD) analyses revealed that the internal phase structure remained unchanged. Energy-dispersive spectroscopy (EDS) and transmission electron microscopy (TEM) identified the elimination of phosphorus (P) during molding, affecting the insulating layer, a critical factor for SMC materials. In motor simulations and actual measurements, the average torque was recorded as 37.7 N·m and 34.7 N·m at 1500 rpm and 27.7 N·m and 25.1 N·m at 2000 rpm, respectively. The torque comparison observed in the actual measurements compared to the simulation results indicates that the output loss increases in the actual measurements due to the deterioration of the insulation performance judged based on the microstructure evaluation. This study confirms the viability of using AncorLam HR in motor cores for electric vehicles and provides key data for improving the performance.

Electromagnetic Characterization of Silicon–Iron Additively Manufactured Cores for Electric Machines

Design and performance of an additively manufactured high-Si transformer core

Development of FeSi steel with increased Si content by laser powder bed fusion technology for ferromagnetic cores application: Microstructure and properties

Evaluation of Microstructure, Mechanical and Magnetic Properties of Laser Powder Bed Fused Fe-Si Alloy for 3D magnetic flux motor application

Laser Additively Manufactured Magnetic Core Design and Process for Electrical Machine Applications

Measurements of Iron Loss in PMSM Stator Cores Based on CoFe and SiFe Lamination Sheets and Stemmed From Different Manufacturing Processes

Additive manufacturing of soft magnetic materials and components

Design and Analysis of a Transverse-flux Permanent Magnet Motor With Hybrid Iron-core

Additive Manufacturing: A New Concept For End Users. The Case Of Magnetic Materials

Evaluation of 3D Printed Cobalt Iron Cores for Filter Inductors

Design of Electric Machines Based on Additively Manufactured Lattice Structures

Additive Manufacturing of Next Generation Electrical Machine Windings: Opportunities in Fusion Engineering?

Electromagnetic shielding properties of LPBF produced Fe2.9wt.%Si alloy

New Measurement Approach and Development of 3-D-Printed Core for Yokeless Axial-Flux Machine

Binder jet additive manufacturing method to fabricate near net shape crack-free highly dense Fe-6.5 wt.% Si soft magnets

Integrating machine learning and multi-objective optimization to investigate the magnetic and mechanical properties of FeSiCr soft magnetic composite processed by selective laser melting

A Review of Additive Manufacturing of Soft Magnetic Materials in Electrical Machines

Application of Soft Magnetic Composite in XEV Motor Core Manufacturing: Process Effects and Performance Analysis

Microstructure and magnetic domain structure of additively manufactured Fe–Si soft magnetic alloys with 3 and 9 wt.-% Si

Near net shape fabrication of anisotropic Fe-6.5%Si soft magnetic materials

Selective laser melting of permalloy magnetic core with complex geometry