Abstract:A major geological risk factor for engineering and energy-related applications, such as CO 2 storage and unconventional hydrocarbon production, is the geomechanical integrity of mudrocks. The goal of this work is to better constrain the macroscopic mechanical properties resulting from microstructural components by investigating the effects of thermal maturity, mineral composition, diagenesis and organic richness on the mechanical properties of Cretaceous mudstones in two surface sections (San Vicente de Chucurí and La Cristalina Creek) and one well (La Luna-1) from the Middle Magdalena Valley Basin (MMVB), Colombia. The thermal maturity of 22 rock samples was evaluated via organic source-rock screening and determination of illite crystallinity (Reichweite). Both geothermometers placed the La Luna Formation rock samples from San Vicente de Chucurí and the La Luna-1 well within the oil generation window (80°C–120°C). In contrast, the rock samples of the Guaguaquí Group from La Cristalina Creek in the southern part of the basin are within the gas window (>180°C). The mineralogy of organic-rich mudstones in the MMVB is dominated by quartz and calcite. Moreover, mudstones from the MMVB have a wide range of organic richness and clay contents, with organic abundances comparable to and clay contents lower than those found in other source-rock reservoirs. The Young's modulus (E IT ), Martens hardness (HM), and creep (C IT ), as determined through macroindentation experiments, highly varied, but overall, the findings suggest that the Cretaceous rocks of the MMVB present conditions favorable for hydraulic fracturing. Furthermore, the viscoelastic properties of Cretaceous rocks in the MMVB are influenced primarily by the concentrations of strong minerals (quartz and calcite) and weak components (clay and TOC). Specifically, an increase in the concentration of weak components compared with that of strong minerals leads to an increase in C IT and a decrease in HM and E IT , and vice versa. Unlike other source-rock reservoirs, there are no indications of a strong correlation between thermal maturity and mechanical properties, suggesting a decoupling of these parameters in rocks of the MMVB. A close scanning electron microscopy examination of the rocks indicated that the observed weak to moderate correlation between thermal maturity and mechanical properties appears to result from rock silicification and calcite cementation caused by the precipitation of these minerals at early stages of diagenesis. This observation implies that the impact of diagenesis on rock geomechanics of silica-rich and calcareous-rich mudstones may override or be more important than the effects of thermal maturity, which, along with clay and organic matter contents, are the greatest controls in the geomechanics of argillaceous source-rock reservoirs..

Impacts of a New Drilling Fluid Invasion on Electrical Resistivity and Acoustic Velocity Measurements

Dynamic Drilling Fluid Invasion Petrophysical Modeling and Corrections in the Presence of Gas Reservoirs - Arab Formation, UAE

Investigating the Alteration of Sandstone Pore System and Rock Features by Role of Weighting Materials

Wettability Alteration and Restoration for Cores Contaminated with Oil-Based Muds

Dynamics of Water Injection in an Oil-Wet Reservoir Rock at Subsurface Conditions: Invasion Patterns and Pore-Filling Events

Effects of organic richness, mineral composition, diagenesis, and thermal maturity on the viscoelastic properties of organic-rich Cretaceous mudstones in the Middle Magdalena Valley Basin, Colombia

NMR-Supported Near-Wellbore Data Analysis to Improve the Petrophysical Evaluation of a Sandstone Reservoir Drilled With Barite-Enriched Water-Based Mud

A Novel Method to Map Heavy Oil Viscosity from Standard Mud Gas – A Field Case from the Peregrino Field

Studying the Effect of Geological Formation and Formation Water on Drilling Fluid Performance (Case Study)

Evaluations of Polyacrylamide Water-Based Drilling Fluids for Horizontal Drilling in the Shaly Wolfcamp Formation

Analysis of Effects of Foreign Clay and Local Clay Additives on Viscosity of Water Based Drilling Mud

Investigation of Reservoir Permeability Impairment When Drilling with Nano Treated Drill-in Mud System

The Effect of Weighting Agents on Sandstone Formation Damage from Water-Based Drilling Fluids

Comparison of Gas Signature and Void Fraction in Water- and Oil-Based Muds Using Fiber-Optic Distributed Acoustic Sensor, Distributed Temperature Sensor, and Distributed Strain Sensor

Controls on mechanical properties of carbonate mudstone: Insights from non-destructive techniques and geochemical data

A New Logging-While-Drilling Method for Resistivity Measurement in Oil-Based Mud.

Improvements in Drilling Fluid Rheology Predictions Using Rotational Viscometer

Influence of solids concentration and solid/polymer interaction on the apparent viscosity of drilling fluids

Frac Fluid induced Damage in Tight Sands and Shale Reservoirs

A Holistic Approach to Characterize Mud Loss Using Dynamic Mud Filtration Data

Use of Mixed-Metal Oxide Water-Based Drilling Fluid System Increased Drilling Performance and Eliminated Mud Losses