Abstract:Ferrites with spinel structure (FSS), especially FSS with doping, show excellent thermal stability and high infrared emissivity performance and can thus be used for improving radiation heat transfer in industrial flame furnaces. In this study, CuxCo1-xFe2O4 samples with varying CuO doping contents (0%, 12.5%, 25%, 37.5%, 50%, 62.5% and 75%) were prepared by a sintering process to study the mechanism of doping on the emissivity of FSS in the 8-14 mu m and 3-5 mu m wavebands to improve the preparation of FSS with excellent performance. The emissivity in the 8-14 mu m and 3-5 mu m bands was measured by an IR-2 dual-band emissivity measurement instrument. The results show that in the 8-14 mu m band, the samples have an obvious increase from 0.869 to 0.925 with CuO addition to 12.5% and a slight increase from 0.93 to 0.94 with further doping from 12.5% to 75%. For all the samples, the force constant for the octahedral position (KO) was calculated based on the data obtained from Fourier transform infrared (FT-IR) spectroscopy and XRD refinement. The result shows that the sample with smaller KO has higher emissivity in the 8-14 mu m band. While for the 3-5 mu m band, there is a minimum value (0.62) in the emissivity at a CuO doping content of 12.5%, with an increase in emissivity observed from 0.62 to 0.77 upon further doping from 12.5% to 75%. The band gap for the as-prepared FSS samples was measured by UV-visible absorption spectra, and it was found that the smaller the band gap is, the higher is the emissivity in the 3-5 mu m band, which indicates that a decreased band gap can increase the energy of electron absorption or emission during the electron transition process for FSS. Thus, the effect of K-0 and band gap on the emissivity in the middle and short waveband was identified in this study, which is of significance for the design and preparation of FSS materials with high emissivity in the middle and short wavebands. (C) 2019 Elsevier B.V. All rights reserved.

Effect of octahedral distortion on temperature-dependent dynamic emissivity behavior in Sc-doped LaFeO 3

Ab-initio Investigation of Anisotropic Optical Properties of LaFeAsO

Effect of crystal size distribution on thermoelectric performance for Lanthanum-doped strontium titanate bulk material

Structural, Magnetic and Transport Properties of Sc-doped La0.7Sr0.3MnO3

Critical Role of Sc Substitution in Modulating Ferroelectricity in Multiferroic LuFeO 3

Tunable Magnetism of 3d Transition Metal Doped BiFeO 3

The Effect of Microstructure on the Middle and Short Waveband Emissivity of CuO-doped CuxCo1-xFe2O4 Spinel

Critical Role of Sc Substitution in Modulating Ferroelectricity in Multiferroic LuFeO3

Structural and magnetic properties of multiferroic hexagonal Lu0.5(Sc1-In )0.5FeO3 ceramics

High Emissivity of Ca2+/Fe3+-Doped LaAlO3 Based Ceramic Materials

The Electrical and Thermal Transport Properties of La-Doped SrTiO3 with Sc2O3 Composite

Room Temperature Multiferroic and Magnetodielectric Properties in Sm and Sc Co-Doped BiFeO3ceramics

Structural, Electrical, and Magnetic Properties of Hexagonal Lu0.5−xZrxSc0.5FeO3 Ceramics

Enhanced Ferroelectric Polarization and Magnetization in BiFe1−xScxO3 Ceramics

Enhanced Multiferroic Characteristics in Hexagonal ScMn1−xFexO3 Ceramics

Spherical Fe 3 O 4 morphology modulation for enhancing infrared emissivity and radiant heat dissipation

Enhancement in the linear electrical properties and thermal stability of chromite perovskites through entropy engineering

Tunning the dielectric and energy storage properties of high entropy ceramics (Bi0.2Na0.2K0.2La0.2Sr0.2)(Ti1-xScx)O3 by Sc-doping at B-site in perovskite structure

The influence of Sc3+ doping on the crystal structure and electrical conductivity of Sr(Ti0.2Zr0.2Y0.2Sn0.2Hf0.2)O3-σ high-entropy perovskite oxides

Improving Room Temperature Negative Thermal Expansion Performance of Fe2‐xScx(MoO4)3

Enhanced thermistor performance of LaCrO 3 through high-entropy strategy