Abstract:The treatment of femoral nonunion with large segmental bone defect is still challenging. Although magnesium alloys have been considered potential materials for such a treatment, their application is limited by their fast degradation. Adding bioceramic particles into magnesium to form Mg-matrix composites is a promising strategy to adjust their biodegradation rates and to improve their mechanical properties and cytocompatibility further. Here, we developed an extrusion-based additive manufacturing technique to fabricate biodegradable Mg-Zn/bioceramic composite scaffolds ex-situ. Inks carrying a Mg-Zn powder and 5, 10 and 15% β-tricalcium phosphate (TCP) powder particles were investigated regarding the dispersion of β-TCP particles in the inks and viscoelastic properties. Optimally formulated inks were then employed for subsequent 3D printing of porous composite scaffolds. The in vitro biodegradation rate of the scaffolds containing 5% β-TCP decreased to 0.5 mm/y, which falls within the range desired for critical-sized bone substitution. As compared to the monolithic Mg-Zn scaffolds, the elastic moduli and yield strengths of the composite scaffolds were much enhanced, which remained in the range of the cancellous bone properties even after 28 d of in vitro degradation. The Mg-Zn/5TCP and Mg-Zn/10TCP scaffolds also exhibited improved biocompatibility when cultured with preosteoblasts, as compared to Mg-Zn scaffolds. In addition, the ALP activity and mineralization level of the composite scaffolds were much enhanced in the extracts of the composite scaffolds. Taken together, this research marks a great breakthrough in fabricating porous Mg-matrix composite scaffolds that meet several design criteria in terms of appropriate biodegradation rate, mechanical properties, and bioactivity. STATEMENT OF SIGNIFICANCE: The treatment of posttraumatic femoral nonunion with large segmental bone defect is still challenging. In this study, we developed a multi-material extrusion-based additive technique to fabricate porous Mg/bioceramic composite scaffolds for such a treatment. The technique allowed for the fine-tuning of printable inks to optimize the dispersion of micro-sized particles. The relative densities of the struts of the fabricated composite scaffolds reached 99%. The added bioceramic particles (β-TCP) exhibited proper interfacial bonding with the Mg alloy matrix. The porous Mg-based composite possessed desired biodegradability, bone-mimicking mechanical properties throughout the in vitro biodegradation period and improved bioactivity to bone cells. These results demonstrated great prospects of extrusion-based 3D printed porous Mg materials to be developed further as ideal biodegradable bone-substituting materials.

Study of compaction-free fabrication of topologically ordered functionally graded iron-hydroxyapatite-zinc biodegradable composite implants

In vitro degradation behavior, cytocompatibility and hemocompatibility of topologically ordered functionally graded iron-hydroxyapatite-zinc composite biodegradable biomaterial fabricated using 3D printing and pressureless microwave sintering

A review on the mechanical and biocorrosion behaviour of iron and zinc-based biodegradable materials fabricated using powder metallurgy routes

Experimental investigations into pressureless microwave sintering of iron–hydroxyapatite composite for biodegradable implants

An experimental investigation of the fabrication of biodegradable zinc–hydroxyapatite composite material using microwave sintering

Three-dimensional printing of titanium/hydroxyapatite composite and functionally graded materials

Fabrication of Ti/HA Composite and Functionally Graded Implant by Three-Dimensional Printing.

Fabrication of Ti + Mg composites by three-dimensional printing of porous Ti and subsequent pressureless infiltration of biodegradable Mg

Biological and mechanical characterization of biodegradable carbonyl iron powder/polycaprolactone composite material fabricated using three-dimensional printing for cardiovascular stent application

Hot deformation and fatigue behaviour of a zinc base doped biocompatible material: characterization of plasma spray coating on surface

Porous metal implants: Processing, properties, and challenges

Development of Fe‐10% (HA/β‐TCP) Composite via Solid State Manufacturing Route and Investigation of Material Properties for Biodegradable Implant Applications

Mechanical and corrosion performance of biodegradable iron porous structures

On the characterization of functionally graded biomaterial primed through a novel plaster mold casting process

Recent advances in 3D printing of biodegradable metals for orthopaedic applications

A Comprehensive Review of the Current Research Status of Biodegradable Zinc Alloys and Composites for Biomedical Applications

Extrusion-based additive manufacturing of Mg-Zn/bioceramic composite scaffolds

Development and performance study of biomedical porous zinc scaffold manufactured by using additive manufacturing and microwave sintering

Biodegradable implant application: Electrodeposition of HA/TiO2/ZrO2 coating onto Zn-composite substrates

Strontium-Substituted Nanohydroxyapatite-Incorporated Poly(lactic acid) Composites for Orthopedic Applications: Bioactive, Machinable, and High-Strength Properties

Developing composite of ZE41 magnesium alloy- calcium by friction stir processing for biodegradable implant applications