Abstract:High-precision navigation and positioning technology for indoor areas has become one of the research hotspots in the current navigation field. However, due to the complexity of the indoor environment, this technology direction is also one of the research difficulties. At present, our common indoor positioning methods are WIFI, Bluetooth, LED, ultrasound and pseudo satellite. However, due to the problem of inaccurate direct or indirect ranging, the positioning accuracy is usually affected, which makes the final application difficult to achieve. In order to avoid the ranging limitations of the existing methods, a new dual-frequency entanglement constraint (DFEC) ranging method based on homologous base station is proposed in this paper. The relationship between the homologous characteristics of dual-frequency signals and the phase relationship within the cycle is used to estimate the current carrier phase adjustment the true value of the cycle count is used to get rid of the constraints of the ranging conditions and improve the ranging accuracy. In order to verify the feasibility of this method, the wired environment test and the typical characteristic points of wireless environment are tested and analyzed respectively. The analysis results show that in the wired environment, the transmitting base station and the receiving terminal will introduce a ranging error of one wavelength; in the wireless environment, due to the influence of spatial noise and multipath, the error of the estimation of the whole cycles of the ranging value increases significantly. And this phenomenon is most obvious especially in the region where the signal is shaded, but the error estimate that satisfies ± 1 wavelength still accounts for 90%. Based on this, we conduct multiple observation data collection at five typical feature points, and used existing MATLAB positioning algorithms to conduct positioning error tests. The analysis found that under this error condition, the positioning accuracy was about 0.6 m, and 93% of the points met the 1-m positioning accuracy.

SRS-based LTE indoor wireless positioning system

A Wireless Location System in Lte Networks

Resonant Beam Enabled DoA Estimation in Passive Positioning System

Implement and Optimization of Indoor Positioning System Based on Wi-Fi Signal.

A Novel Architecture for Ubiquitous Location Based Services in Td-Scdma

The Design of Indoor Positioning Prototype Based on Wi-Fi

Indoor localization for an unknown radio emitter employing graph-based optimization and improved RSSD

A Method for Improving UWB Indoor Positioning

Indoor Localization With Distributed 5G Small Cells Considering Time Alignment Errors

Combined BDS/5G Seamless Positioning Scheme Based on Joint Switching Strategy of Satellite Elevation Angle and CNR in Complex Urban Environments

WiFi-Based Indoor Positioning and Communication: Empirical Model and Theoretical Analysis

RSS-based Indoor Passive Localization Using Clustering and Filtering in a LTE Network.

Research and Implementation of Indoor Positioning Prototype Based on Wi-Fi

An Indoor Positioning Algorithm Based on Received Signal Strength of WLAN

A hybrid TDoA/RSSI model for mitigating NLOS errors in FMCW based indoor positioning systems

Design And Verification Of An Indoor Wireless Uwb Positioning System For Civil Structures

Indoor unknown radio transmitter localization using improved RSSD and grey correlation degree

An Indoor DFEC Ranging Method for Homologous Base Station Based on GPS L1 and BeiDou B1 Signals

A Practical RF-based Indoor Localization System Combined with the Embedded Sensors in Smart Phone

Fingerprint-based Localization using Commercial LTE Signals: A Field-Trial Study